Boiler Tubes
Boiler Tubes for SaleDescription
HUASHANG,pipe fittings manufacturers in china, has the cold draw computing device which is 70 meters long, can produce fifty-three meters long for every pipe. With the advanced technological know-how from Korea and Japan, it makes the extra close dimension controls.HUASHANG has developed an exceptional bright annealing process, the heat treatment is performed in a so-called closed furnace. The heat treated substances is covered via an inter gas atmosphere, which guarantees the oxygen cant enter the furnace to contact with the materials, and react to form scale on or tarnish the materials, The surface end is clean, bright and precision even for the tube with greater than 24 meters.
To ensure the quality of each tube from Huashang, all tubes are done 100% PMI test, 100% hydraulic test, 100% inner cleaned by sponge, 100% Dimension test and 100% surface test. Type of tube: atraight tube and u-bend tube/ seamless tube & welded tube.
Boiler Tubes Sizes
OD: 6.35mm--44.5mm
WALL THICKNESS: 0.71mm--3.81mm
Length: MAX 53 meters or as U-BEND tubes
Boiler Tubes Materials
Austenitic Stainless Steel:TP304, TP304L, TP304H, TP304LN, TP316/TP316L, TP316H, TP316Ti, TP316LN, TP321, TP321H, TP317, TP317L, TP347, TP347H, TP310S, TP310H, TP904L, 254Mo.S30432, S31042, N08367
Duplex & Super Duplex Steel:
S31500, S32101, S32003, S32304, S31803, S32205, S32750, S32760
Nickel Alloy Steel:
N06600, N06601, N06625, N07718, N08800, N08825, N10276, N04400, N05500, N02200, N02201, N08028, N08810, N08811, N08020, N10624, N10629, N10675
Boiler Tubes Standard
ASTM A789, ASME SA789, EN10216-5, ASTM B163, ASTM B167, ASME SB163, ASME SB167, ASTM B668, ASME SB668, ASTM A269, ASME SB677, ASTM A213, ASME SA213, ASME SA269, ASMT A270, ASTM B622, ASTM B516Chemical Composition of Nickel Alloy, Duplex steel & Austenitic Steel
| Grade | C | Si | Mn | P | S | Cr | Ni | Mo | Ti | N | Cu | Fe | Al | Co | Zr | Nb | Tu | Va |
| Max | Max | Max | Max | Max | Max | Max | Max | Max | Max | |||||||||
| Nickel Alloy | ||||||||||||||||||
| Inconel 600/No6600/2.4816 | 0.15 | 0.5 | 1 | 0.015 | 14-17 | ≧72 | 0.5 | 6.0-10.0 | ||||||||||
| Inconel 600/No6601/2.4851 | 0.1 | 0.5 | 1.5 | 0.015 | 21-25 | 58-63 | 1 | 1.0-1.7 | ||||||||||
| Inconel 690/No6690 | 0.05 | 0.5 | 0.5 | 0.015 | 27-31 | 58 | 0.5 | 7.0-11.0 | ||||||||||
| Inconel 625/No6625/2.4856 | 0.1 | 0.5 | 0.5 | 0.015 | 0.015 | 20-23 | ≧58 | 8.0-10.0 | ≦0.4 | 5 | ≦0.4 | 3.15-4.15 | ||||||
| Inconel 718/No7718/2.4668 | 0.08 | 0.35 | 0.35 | 0.015 | 0.015 | 17-21 | 50-55 | 2.8-3.3 | 0.65-1.15 | 0.006 | 0.3 | Remainder | 0.2-0.8 | 4.75-5.5 | ||||
| Incoloy 800/No8800/1.4876 | 0.1 | 1 | 1.5 | 0.015 | 19-23 | 30-35 | 0.15-0.6 | 0.75 | ≧39.5 | 0.15-0.6 | ||||||||
| Incoloy 800H/No8810/1.4958 | 0.05-0.1 | 1 | 1.5 | 0.015 | 19-23 | 30-35 | 0.6-1.2 | 0.75 | ≧39.5 | 0.15-0.6 | 1 | |||||||
| Incoloy 825/No8825/2.4858 | 0.05 | 0.5 | 1 | 0.03 | 19.5-23.5 | 38-46 | 2.5-3.5 | 1.5-3 | ≧22 | 0.2 | ||||||||
| C-276/No10276/2.4819 | 0.01 | 0.08 | 1 | 0.04 | 0.03 | 14.5-16.5 | Balance | 15.0-17.0 | 4.0-7.0 | 2.5 | 3-4.5 | 0.35 | ||||||
| Monel 400/No4400/2.4360 | 0.3 | 0.5 | 2 | 0.024 | ≧63 | 28-34 | 2.5 | |||||||||||
| Monel K-500/No5500 | 0.18 | 0.5 | 1.5 | 0.01 | 63 | 0.35-0.85 | 27-33 | 2 | 2.3-3.15 | |||||||||
| Alloy 20/No8020/2.4660 | 0.07 | 1 | 2 | 0.045 | 0.035 | 19-21 | 32-38 | 2.0-3.0 | 3.0-4.0 | Balance | 8C-1 | |||||||
| Alloy 28/No8028 | 0.03 | 1 | 2.5 | 0.03 | 0.03 | 26-28 | 30-34 | 3.0-4.0 | 0.6-1.4 | Remainder | ||||||||
| Duplex Steel | ||||||||||||||||||
| S31803/1.4462 | 0.03 | 1 | 2 | 0.03 | 0.02 | 21-23 | 4.5-6.5 | 2.5-3.5 | 0.08-0.2 | |||||||||
| S32205/1.4462 | 0.03 | 1 | 2 | 0.03 | 0.02 | 22-23 | 4.5-6.5 | 3.0-3.5 | 0.14-0.2 | |||||||||
| S32750/1.4410 | 0.03 | 0.8 | 1.2 | 0.035 | 0.02 | 24-26 | 6.0-8.0 | 3.0-3.5 | 0.24-0.32 | 0.5 | ||||||||
| S32760/1.4501 | 0.05 | 1 | 1 | 0.03 | 0.01 | 24-26 | 6.0-8.0 | 3.0-4.0 | 0.2-0.3 | 0.5-1.0 | ||||||||
| Austenitic | ||||||||||||||||||
| 304/1.4301 | 0.08 | 1 | 2 | 0.045 | 0.03 | 18-20 | 8-10.5 | |||||||||||
| 304L/1.4307 | 0.035 | 1 | 2 | 0.045 | 0.03 | 18-20 | 8.0-12.0 | |||||||||||
| 304H/1.4948 | 0.04-0.1 | 1 | 2 | 0.045 | 0.03 | 18-20 | 8.0-11.0 | |||||||||||
| 316/1.4401 | 0.08 | 1 | 2 | 0.045 | 0.03 | 16-18 | 11.0-14.0 | 2.0-3.0 | ||||||||||
| 316L/1.4404 | 0.035 | 1 | 2 | 0.045 | 0.03 | 16-18 | 10.0-14.0 | 2.0-3.0 | ||||||||||
| 316H/1.4919 | 0.04-0.1 | 1 | 2 | 0.045 | 0.03 | 16-18 | 10.0-14.0 | 2.0-3.0 | 0.1 | |||||||||
| 316Ti/1.4571 | 0.08 | 1 | 2 | 0.045 | 0.03 | 16-18 | 10.0-14.0 | 2.0-3.0 | 0.7>5x(C+N) | |||||||||
| 321/1.4541 | 0.08 | 1 | 2 | 0.045 | 0.03 | 17-19 | 9.0-12.0 | 0.7>5x(C+N) | ||||||||||
| 321H/1.4878 | 0.04-0.1 | 1 | 2 | 0.045 | 0.03 | 17-19 | 9.0-12.0 | H | ||||||||||
| 317/1.4449 | 0.08 | 1 | 2 | 0.045 | 0.03 | 18-20 | 11.0-14.0 | 3.0-4.0 | ||||||||||
| 317L/1.4438 | 0.035 | 1 | 2 | 0.045 | 0.03 | 18-20 | 11.0-15.0 | 3.0-4.0 | ||||||||||
| 347/1.4550 | 0.08 | 1 | 2 | 0.045 | 0.03 | 17-19 | 9.0-12.0 | |||||||||||
| 347H/1.4912 | 0.04-0.1 | 1 | 2 | 0.045 | 0.03 | 17-19 | 9.0-13.0 | |||||||||||
| 310S/1.4845 | 0.08 | 1 | 2 | 0.045 | 0.03 | 24-26 | 19.0-22.0 | 0.11 | ||||||||||
| 310H/1.4845 | 0.04-0.1 | 1 | 2 | 0.045 | 0.03 | 24-26 | 19.0-22.0 | |||||||||||
| N08904(904L)/1.4539 | 0.02 | 1 | 2 | 0.045 | 0.03 | 19-23 | 23.0-28.0 | 4.0-5.0 | 0.1 | 1.0-2.0 | ||||||||
| S31254(254Mo)/1.4547 | 0.02 | 0.8 | 1 | 0.03 | 0.01 | 19.5-20.5 | 17.5-18.5 | 6.0-6.5 | 0.18-0.22 | 0.5-1.0 | ||||||||
Boiler Tubes Specification/Technical Data
在线联系供应商
Other supplier products
 |
Tube Caps | Product description Tube cap, also known as end cap, plug, cap, pipe cap, stuffy head, welded in the end of the pipe or installed on the outside th... |
 |
Weld Neck Flanges | Product description WELDING NECK RISE FACE FLANGE（WNRF） Stainless steel weld neck flanges are popularly used in excessive stress applications, wi... |
 |
Stainless Steel Capillary Tubes | Product description Stainless Steel Capillary TubeDescription: Whether you need to exchange device tubing as a section of your troubleshooting or w... |
|
|
180 Degree Elbow | The connection form of 180 degree elbow is butt welding elbow and steel pipe directly. According to its curvature radius, butt welding can be divid... |
 |
Precision Tubes | Product description Precision Tubes Description Precision steel tubefeatures in large size, high precision, smooth surface inside and outside, pr... |
Same products
 |
Insulated Copper Tube | 卖方: Ningbo Jintian Copper (Group) Co., Ltd., | Insulated Copper Tube As a big and responsible copper pipe insulation manufacturer, we produced ... |
 |
EAM12 Earpiece with on-MIC PTT & VOX& Transparent Acoustic Tube | 卖方: Hytera Communications Corporation Limited | Specifications of EAM12 Specs_Acc_Audio Weight about 32g Color black PTT Key available VOX su... |
|
|
Boiler Tubes | 卖方: WENZHOU HUASHANG STEEL CO.,LTD | Boiler Tubes for SaleDescription HUASHANG,pipe fittings manufacturers in china, has the cold dra... |
|
|
Tube Caps | 卖方: WENZHOU HUASHANG STEEL CO.,LTD | Tube cap ,also known as end cap, plug, cap, pipe cap, stuffy head, welded in the end of the pipe ... |
|
|
Precision Tubes | 卖方: WENZHOU HUASHANG STEEL CO.,LTD | Precision Tubes Description The traditional annealing approach is performed in a so referred to ... |
