2 parts fluid mixing dispenser 2 component dosing epoxy PU silicon rubber vacuum system
What is the difference between 2K AB adhesive materials manual potting machine and robot pottingmachine ?
- Vacuum material-feedingsystemor diaphragm pump feeding system
- High precision pump metering system
- Dynamic/Static mixing system
- Three-axis motion system
- Programming control system.
AB-componentmaterialsflows into the pump through the feedingsystem (AB tanks) separately by the self-suction force of the metering pump.
- Vacuum material-feedingsystem
- High precision pump metering system
- Dynamic/Static mixing system
- Manual dispensing by glue gun or pedal .
AB-componentmaterialsflows into the pump through the feedingsystem (AB tanks) separately by the self-suction force of the metering pump.
Strong versatility/Multiple configuration/High production capacity/High precision
- Auto feeding :take use of vacuum pressure to feed materials into A&B tank separately.
- Tank Stirring :A and B tank configure with stirring motors and blades to prevent material sediment in the tank bottom .
- Heating :Tank , pipe , pumps are optional with heaters to assure the whole system can be heating from room temperature to 90°C adjustable.
- Vacuum :A &B tank vacuum for degas the bubble inside material .
- Dynamic mixing :Configuring dynamic motor and mixer to mix A and B fluids evenly.
Advantages:
1,Accuratedmetering and even mixing helps to avoid the waste ofmaterial.
2,Dispensingvolumeand positioning keep machine work consistent and fast.
3,Good universality
4,Easy to program and operate.
5,Tally function, non-standard mode, primer mode, level alert, filter mode, liquid display device, preventing back-flow device and other functional device.
- Applications:
Transformer , capacitance , power module , regulating plate ,protection module , generator , pressure package , soli relay ,fault indicator , Sensors , junction box , clutch , wave filter , water meter , boattery cover , rectifier and so on ...
1Kand 2-component polyurethanes, epoxies, acrylics, silicones, temperature, humidity and UV curing materials.
Two component potting materials ,2-partcompound materials,AB partcompound materials,2Ksilicones,2Kepoxiesresin,Bi-componentPU,Ployerster,Polyurethane,UV materialsand so on .
Machine description and working principle
Compound materialsA & B are kept in two tanks separately. There are two sets of metering pumps inside the machinefor metering A and B resin by setting ratio, draining outmaterialindividually from tank A & B. Liquid A & B mix with each other in the mixer pipe and dispensed out according to the programmable data.
在线联系供应商
Other supplier products
 |
Introduction to Honeycomb Board Gluing Machine | Introduction to Honeycomb Board Gluing Machine In the realm of industrial manufacturing, the Honeycomb Board Gluing Machine stands out as a crucia... |
 |
Automatic Liquid Dispensing Machine Glue Dispenser for Ab Glue LED Display Dispenser | Full Automatic Potting Machine Ab Glue Dispenser Machine for LED Strip Light Potting and encapsulation is the proces... |
 |
Cantilever-type glue MGO SIP Panel laminating line for XPS Insulation Board/Magnesium Oxide Structural Insulated Panel | Cantilever-typeglueMGO SIP Panel laminating line for XPS Insulation Board/Magnesium Oxide StructuralInsulated Panel The glue Spraying line is ba... |
 |
Two Component Silicone Sealant Dispensing Machine Adhesive Dispensing Glue Application Equipment Dosing Equipment | Fully automatic polyurethane resin glue dispensing robot two components glue automatic meter-mix dispensing line 2 Part Silicone plyurethane ep... |
 |
Metering Mixing and Dispensing Machine PU Resin Dynamic Polyurethane Dosing System Automatic Epoxy Resin Filling Machine. ... Ab Component Two Part Glue Dispensing Potting Epoxy Silicone PU Resin Mach | Metering Mixing and DispensingMachinePUResin Dynamic PolyurethaneDosingSystem Automatic Epoxy Resin FillingMachine....AbComponent TwoPartGlue Dis... |
Same products
 |
Rail Welder A Frame aligners railway welding tools | 卖方: 834406 | 产品描述 A型车架 A-Frame 是一种导轨对准器，可精确对准要焊接的导轨。该设备在焊接操作期间将导轨固定到位。 |
|
|
2 parts fluid mixing dispenser 2 component dosing epoxy PU silicon rubber vacuum system | 卖方: 824681 | What is the difference between 2K AB adhesive materials manual potting machine and robot pottingm... |
 |
Horizontal Machining Center | 卖方: Xilong (Shanghai) Machine Tool Co., Ltd. | Horizontal Machining Center parts can automatically finish four sides milling, boring, drilling, ... |
 |
Horizontal Lathe | 卖方: Xilong (Shanghai) Machine Tool Co., Ltd. | As a professional horizontal lathe manufacturerand horizontal lathe factory, Sealion Machine Tool... |
 |
Gantry Machining Center | 卖方: Xilong (Shanghai) Machine Tool Co., Ltd. | SEALION supplies Gantry Machining Center both tables moving type or gantry moving type. Gantry ty... |
