Metal Sheet Press Brake

• 

It is well known that the process of bending the metal tube in a widely used way is to fill the tube with sand and then heat it, this method has low labor efficiency, and the shape of the metal tube after bending is different. Then the new type of metal plate bending machine is the basic no-cutting process of metal tube, specifically a metal sheet press brake.

The Advantages of Metal Bender Brake:

1. 2. The metal bar bending machine has a narrow slit: the laser beam focuses on a small point of light, which causes the focal point to reach a high power density, and the material is quickly heated to the degree of vaporization, which evaporates into the hole. With the relative linear movement of the beam and the material, the hole is continuously formed in a narrow slit. The incision width is generally 0.10 ~ 0.20 mm. 3. The metal bender machine improves the development speed of the new product: after the product drawing is formed, the laser processing can be carried out immediately, and the new product can be obtained in the shortest time. 4. The bending speed is fast: the cutting speed can reach 10 m/min, and the maximum positioning speed can reach 70 m/min, which is much faster than line cutting. 5. The cutting quality of the metal bender machineis good: no contact cutting, the cutting edge is very small, there is no thermal deformation of the workpiece, it is necessary to avoid the collapse of the material in the cutting. 6. The precision of the pipe bending machine is high: the positioning accuracy is 0.05mm and the repeat positioning accuracy is 0.02 mm. 7. The is not affected by the hardness of the cut material: laser can be processed to steel plate, stainless steel, aluminum alloy plate, hard alloy, no matter what hardness, no deformation cutting can be carried out. 8. The metal plate press brake is not affected by the shape of workpiece: the laser is flexible, it can process any figure, it can cut the pipe and other profiles. 9. The sheet metal machinerycan cut and process nonmetals: plastic, wood, PVC, leather, textiles, plexiglass, etc. 10. The cutting surface of the pipe bender is smooth: the cutting surface has no burrs, and the surface roughness of the incision is generally controlled within Ra12.5. 11. The CNC Hydraulic Metal Bender saves materials: computer programming can be used to make the different shapes of products in the whole plate material, and maximize the utilization of materials. 12. Saving mold investment in pipe bending machine: laser cutting machine is not needed for mold, no die consumption, no need to repair the mold, saving the time of replacing the mould, thus saving the processing cost, reducing the production cost, especially suitable for the processing of large products.

Другие товары поставщика

	Digital Electric Guillotine Cutting Machine	digital electric guillotine cutting machine Metal Cutting Guillotine Detailed Introduction Guillotine Metal Cutter Technical Data: ...
	Servo Press Brake	Sevo CNC Press Brakes keep double cylinders synchronized by using system output to control hydraulic pressure system. Press Brakes form closed loop...
	Conventional Press Brake	Conventional Press Brake Brochure: Conventional Press Brake Technical Data: Conventional press brake productsalso are non-numerical control pre...
	Manual Press Brake	Manual press brake is divided into mechanical press brakemanualand electric manual press machine. This plate bending machine manual can be used to ...
	Tandem Press Brake	The cnc tandem press brake products are composed of at least two machines, which can bend the plank of 32 meter in a single operation. This tandem ...

Похожие товары

	Profile Bending Machine	Продавец: Hubei Heavy Industry Equipment Co., LTD	The profile bending machineis special high-efficiency processing equipment for the bending of var...
	Plate Rolling Machine For Tank	Продавец: Hubei Heavy Industry Equipment Co., LTD	The upper rollers of the machine can be moved vertically and horizontally. The vertical lifting i...
	Plate Bending Machine	Продавец: Hubei Heavy Industry Equipment Co., LTD	The plate bending machine chinais forging equipment used to bend metal plates. It is dedicated to...
	Plate Leveling Machine For Sale	Продавец: Hubei Heavy Industry Equipment Co., LTD	EZHONG specializes in the production of heavy plate leveling machines, composite plate levelers, ...
	Hydraulic Press	Продавец: Hubei Heavy Industry Equipment Co., LTD	As a professional hydraulic press machine factoryin China, Ezhong Groupspecializes in producing s...