Active rotary lime kiln to produce metallurgical lime used in electric arc furnace steelmaking

• 

Active rotary lime kiln to produce metallurgical lime used in electric arc furnace steelmaking

rotary lime kiln
metallurgical lime
electric are furnace steelmaking
Active rotary lime kiln
rotary lime kiln to produce metallurgical lime
Active rotary lime kiln used in electric arc furnace steelmaking

Kiln Active lime rotary kiln is composed of cylinder, gears, support device, kiln liner and kiln tail sealing equipment, hood of kiln head and alkene material device etc. Active Lime rotary kiln as a heating device is a high-quality steel processed, is supported on the support device by tyer, and there is hydraulic pressure catch wheel on the first or some gear in order to control the turning of cylinder. Gearing gyrate according to process-required rotating speed by ring gear in the middle of cylinder.

Because of the need of installation or maintenance, the bigger Active lime rotary kiln has auxiliary gears, which makes cylinder gyrate more slowly. To prevent cold air come in and dust overflow, the reliable kiln tail and hed sealing equipment are installed on feed and discharge end. The most common are Cement clinker Rotary kiln, etc., more models to choose.

Feature of SINOM’s active lime rotary kiln:

Rotary kiln design should meet the following requirements:

1, The specification of the rotary kiln should meet the demand of burning system output and it should be determined comprehensively combining the raw materials or fuel condition and the configuration situation of the preheater, decomposition furnace and the cooling machine.

2, The proportion of preheater kiln and pre-decomposing furnace(L/D) had better to be 11-16. 　

3, The slope of preheater and decomposition furnace should be 3.5%-3.5%; In the terms of rotation speed, the decomposition furnace should be 3.0-3.5 r/min and the preheater should be 2.0-2.5 r/min. The speed changing range should be1:10.　

4, The cooling of rotary kiln burned into cylinder should adopt forced air cooling.

5, The main motor of rotary kiln should adopt steepless variable speed motor and should be installed auxiliary transmission and emergency power supply.

Working principle of active lime rotary kiln:

The limestone is 1150 degrees Celsius in the preheater kiln gas heated to 900 degrees Celsius, about 30% decomposition,and then the hydraulic push the push rod into rotary kiln. The limestone in rotary kiln roasts decomposition theory for CaO and CO2. Decomposition generates into the cooler lime and will be cooled in the cold air cooling to 100 degree Celsius eduction. The heat to 600 degrees Celsius heat of air into the kiln and the mixed fuel gas. The cold wind confirmed by waste gas again into the bag filter induced fan, then the drained to the chimney. Discharge of the cooler the lime vibrating feeder, chain conveyor and fight a pattern lift machine and belt into the lime library. According to the needs of user to determine whether screening process classification.

◆Preheater without pushing rod

For more detailed technical information, please feel free to contact us. Sinom at sinomgroup dot com

Contact informaiton:

Tel:

Mobile:

Web:

Другие товары поставщика

	graphite metallurgical roll for wire rolling mills and small section mills	graphite metallurgical roll for wire rolling mills and small section mills wire mills small section mills graphite metallurgical roll graphite meta...
	best quality horizontal carousel airport equipment manufacturer	best quality horizontal carousel airport equipment manufacturer airport equipment manufacturer best quality horizontal carousel best quality airpor...
	coil handling system makes efficient coil transportation for rolling mill	coil handling system makes efficient coil transportation for rolling mill Coil Handling System VERSATILE HANDLING SOLUTIONS The finishing end of h...
	titanium material Titanium slag furnace used for produce titanium sponge supplier	titanium material Titanium slag furnace used for produce titanium sponge supplier Titanium slag furnace titanium slag titanium material Titanium sl...
	CCM copper mould plate for slab casting machine	CCM copper mould plate for slab casting machine SINOM CCM copper plate for slab casting machine covers Slab mould copper plate, thin slab mould cop...

Похожие товары

	Электромагнитный клапан серии 151	Продавец: ZORGON	Электромагнитный клапан серии 151. В технологическом производстве электромагнитные клапаны часто ...
	Система привода колесного блока с мотор-редуктором для крана	Продавец: KunFeng heavy industry (suzhou) co., LTD. (KF CRANE)	Полная система ведомых колес включает в себя колеса, электрический асинхронный двигатель переменн...
	Система колесных блоков DRSA	Продавец: KunFeng heavy industry (suzhou) co., LTD. (KF CRANE)	Система колесных блоков KUNFENG® DRSA отличается большой грузоподъемностью при компактных раз...
	CNC machining precision steel parts	Продавец: BRM МИМ Технология, Запчасть из Нержавеющей Стали	BRM metal injection molding specializes in Powder Metallurgy for all industries with more than 20...
	Precision CNC machining platen of rotor for automotive transmission parts	Продавец: BRM МИМ Технология, Запчасть из Нержавеющей Стали	Product Specifications /Features : Feedstock– Injection molding – De-binding – ...