800m Drilling depth Water Well Drilling Rig
- Equipped with a 194KW Cummins brand 6-cylinder turbo engine with strong power and long service life;
- Patented design compound boom, double oil cylinder lift, strengthen the tower;
- (Italy imported oil pump) 3 oil pumps, equipped with foam pump, winch, multi-function generator, front outrigger swing arm oil cylinder;
- Each drilling rig is equipped with a baffle on the main arm to protect the oil cylinder;
- The diameter of the hole is large, the hole is deep, and the advancing speed is fast.
- Drilling rig chassis: Reinforced steel crawler, large chassis, strong and durable, heavy bearing, wide chain plate, large tonnage.
- Parallel transmission design, sufficient power, reasonable distribution, unique hydraulic system design, simple maintenance and low cost.
- The independent heat dissipation dual system adopts hydraulic oil temperature cooling and is equipped with traditional air cooling. long engine life
- Equipped with dual systems: 1. Air power system with air compressor 2. Mud pump system with mud pump.
Optimal Hole Range: φ140-400
Hole depth.Max: 800m
| The weight （T） | 13 |
|---|
| The hole diameter （mm） |
140-400 |
| Drilling depth （m） |
800 |
| One-time advance length （m） |
6.6 |
| Walking speed （km/h） |
2.5 |
| Climbing angles （Max.） |
30 |
| Equipped capacitor （kw） |
194 |
| Using air pressure （MPA） |
1.7-3.5 |
| Air consumption （m³/min） |
17-42 |
| Swing speed（rpm） |
45-140 |
| The penetrationefficiency （m/h） |
15-35 |
| Drill pipe diameter （mm） |
φ102 φ108 φ114 φ117 |
| Drill pipe length （m） |
1.5m 2.0m 3.0m 6.0m |
| Rig lifting force （T） |
36 |
| Rapid rise speed （m/min） |
20 |
| Fast feedingspeed （m/min） |
40 |
| Width of loading（m） |
2.95 |
| Hoisting force of winch （T） |
2 |
| Swing torque （N.m） |
9000-14000 |
| Dimension （mm） |
6300×2300×2650 |
| Equipped with hammer |
Medium and high wind pressure series |
| High leg stroke （m） |
1.7 |
Другие товары поставщика
|
|
425-1 Φ115-138mm Separated DTH Mine Drilling Rig Hole |
This series of separated DTH (Down-the-Hole) drill rigs has been primarily used in small and medium-sized quarries, cement mines, open-pit coal min... |
|
|
500m Drilling depth Full Hydraulic Crawler Mounted Water Well Borehole Drilling Rig |
Traveling device: equipped with new traveling motor and reducer, with long service life.
Hydraulic oil pump: imported from Italy, parallel gearb... |
|
|
400m high-efficiency and energy-saving crawler-type core drilling rig |
Reliable performance： According to the guidelines for international procurement of key auxiliary equipment, diesel engines, hydraulic pumps, main v... |
|
|
1200m Core Rock Drilling Rig |
Reliable performance： According to the guidelines for international procurement of key auxiliary equipment, diesel engines, hydraulic pumps, main v... |
|
|
D470D Φ138-165mm Integrated Dth Surface Drilling Rig For Mining |
The RuiXin 470D offers an optional 7-meter drill pipe configuration, a design that significantly enhances drilling efficiency: longer single-sectio... |
Все товары поставщика
Похожие товары
