800m Drilling depth Water Well Drilling Rig
- Equipped with a 194KW Cummins brand 6-cylinder turbo engine with strong power and long service life;
- Patented design compound boom, double oil cylinder lift, strengthen the tower;
- (Italy imported oil pump) 3 oil pumps, equipped with foam pump, winch, multi-function generator, front outrigger swing arm oil cylinder;
- Each drilling rig is equipped with a baffle on the main arm to protect the oil cylinder;
- The diameter of the hole is large, the hole is deep, and the advancing speed is fast.
- Drilling rig chassis: Reinforced steel crawler, large chassis, strong and durable, heavy bearing, wide chain plate, large tonnage.
- Parallel transmission design, sufficient power, reasonable distribution, unique hydraulic system design, simple maintenance and low cost.
- The independent heat dissipation dual system adopts hydraulic oil temperature cooling and is equipped with traditional air cooling. long engine life
- Equipped with dual systems: 1. Air power system with air compressor 2. Mud pump system with mud pump.
Optimal Hole Range: φ140-400
Hole depth.Max: 800m
| The weight （T） | 13 |
|---|---|
| The hole diameter （mm） | 140-400 |
| Drilling depth （m） | 800 |
| One-time advance length （m） | 6.6 |
| Walking speed （km/h） | 2.5 |
| Climbing angles （Max.） | 30 |
| Equipped capacitor （kw） | 194 |
| Using air pressure （MPA） | 1.7-3.5 |
| Air consumption （m³/min） | 17-42 |
| Swing speed（rpm） | 45-140 |
| The penetrationefficiency （m/h） | 15-35 |
| Drill pipe diameter （mm） | φ102 φ108 φ114 φ117 |
| Drill pipe length （m） | 1.5m 2.0m 3.0m 6.0m |
| Rig lifting force （T） | 36 |
| Rapid rise speed （m/min） | 20 |
| Fast feedingspeed （m/min） | 40 |
| Width of loading（m） | 2.95 |
| Hoisting force of winch （T） | 2 |
| Swing torque （N.m） | 9000-14000 |
| Dimension （mm） | 6300×2300×2650 |
| Equipped with hammer | Medium and high wind pressure series |
| High leg stroke （m） | 1.7 |
在线联系供应商
Other supplier products
 |
412B-1 Φ76-110mm Separated DTH Mine Drilling Rig Hole | This series of separated DTH (Down-the-Hole) drill rigs has been primarily deployed in medium and small-sized quarries, cement mines, open-pit coal... |
 |
1000m Mining Core Drilling Rig Machine | Reliable performance： According to the guidelines for international procurement of key auxiliary equipment, diesel engines, hydraulic pumps, main v... |
 |
454H Φ115-152mm Integrated Dth Surface Blasting Hole Drill Rig Rock Drilling Machine | While maintaining high efficiency and low energy consumption, this rig is capable of meeting the drilling requirements for blast holes (115 mm&ndas... |
 |
600m Drilling depth Factory Price Water Well Drilling | adopts full hydraulic control, the top drive drives the drilling tool to rotate, and the drilling efficiency is high. Using Cummins 113kw genera... |
 |
D440A Φ90-138mm High Efficiency Integrated Type Portable Dth Drill Rig | Beyond its core strengths of high drilling efficiency and stable reliability, the RuiXin D440A stands out for two additional key advantages: except... |
Same products
 |
YZH stationary hydraulic rock breaker | 卖方: 广西元征行机械设备有限公司 | 一、精准破拆，告别堵卡困扰 从现场作业图中可以清晰看到，元征行固定式液压碎石大臂正高效地对格筛内的矿石进行破碎作业。其核心优势在于： 精准作业：大臂可灵活调整角度与力度，精准打击堵卡的矿石，... |
 |
YZH WHEN1500固定式液压机械臂 | 卖方: 山东伊润基础工程有限公司 | 以下是YZH WHEN1500固定式液压拆除臂的详细介绍，包括其特点、优点和案例研究：YZH WHEN1510固定式底座碎石机臂的特点：智能多模式控制：支持驾驶室操作、无线/有线远程控制、光纤+... |
 |
YZH WHEN1410固定式底座碎石机 | 卖方: 山东伊润基础工程有限公司 | YZH WHEN1410固定式底座碎石机是一种专为采矿、冶金及相关行业大型物料的二次破碎而设计的专用设备。通过更换附件（如液压锤或莲花爪），它可以执行多种功能，包括破碎、抓取和拆除。 WHEN... |
 |
YZH WHEN 1300固定式底座碎石机 | 卖方: 山东伊润基础工程有限公司 | WHEN 1300固定式底座碎石机的特点：智能多模式控制：支持驾驶室操作、远程控制和视频监控。远程控制范围可达10-20km，集成有线/无线双模操作。配合高性能控制器，可实现精确定位和灵活控制。... |
 |
WHE1500 Pedestal Breaker Boom Systems | 卖方: 山东伊润基础工程有限公司 | WHE1500底座式断路器臂架系统的特点： WHE1500底座破碎机臂系统是一种集机械、电气和液压系统于一体的专用二次破碎装置。其设计解决了采矿、冶金和相关行业中的材料堵塞和大块破碎挑战。 采用... |
