Positioning Components-Locking Block Sets
| Material | Hardness |
| 1.2343 | HRC50°~56° |
| Type | Dimension | |||||||||
| t | d4 | d | I5 | I4 | I3 | I2 | I1 | S1 | b3 | |
| JHN09/30 | 5 | 4 | M10 | 16.5 | 4.5 | 20 | 11.5 | 10.5 | 36 | 30 |
| JHN09/42 | 7 | 5 | 18.5 | 5.5 | 15.5 | 14.5 | 46 | 42 | ||
| JHN09/54 | 8 | 6 | M12 | 20.5 | 7.5 | 25 | 18.5 | 17.5 | 56 | 54 |
| JHN09/80 | 11 | 8 | M16 | 25.5 | 30 | 28.5 | 27.5 | 76 | 80 | |
Attentions given by positioning component supplier who wholesales high quality positioning component:
Remember the following points as you position multiple components:
• All the components are positioned together without any relative movement between one another.
• You can define constraints for multiple components in the same manner as you do for a single component.
• You can add one or more components for positioning even as the Position tool is active. The added component immediately gets the transformation that the other components are sharing.
• If you have selected 2 or more components for positioning, you cannot deselect any of them until they are positioned.
• You can move and reposition multiple components as one unit using the handles of the dragger. While dragging a linear handle, you can snap the components to a geometric reference and constrain them.
• If you add one or more components to a positioned multiple component set, any constraints that were applied earlier while positioning the components are cleared.
Отправить запрос, связаться с поставщиком
Другие товары поставщика
 |
Embedded Spring | Characteristic description of embedded spring:Hard screws are fixed directly inside the alloyThe stainless steel screw is directly fixed inside t... |
 |
Sling Ejector Pin JHN03 | Ejector pinis the “bouncer” of the injection molding world. They apply force to eject a part from the mold, and in some cases can leave... |
 |
MateriaSpure Bushing-A Type JH025 | Inner HardnessSurface HardnessHeat Treatment S45CSR section HRC50°~55°Partial HRC60°±2°HRC60°±2°Vacuumed SKD1... |
|
|
Positioning Components-Locking Block Sets | Material Hardness 1.2343 HRC50°~56° Type Dimension t d4 d I5 I4 I3 I2 I1 S1 b3 JHN09/30 5 4... |
 |
Straight Ejector Sleeve Pins | JH Ejector Sleeve ranges from straight, step, multiple step, or thin walled sleeves. Nitrided SKD61 being the most commonly used steel in ejection ... |
Похожие товары
|
|
Positioning Components-Locking Block Sets | Продавец: TAIZHOU HUANGYAN JINHONG MOULD PARTS CO.,LTD. | Material Hardness 1.2343 HRC50°~56° Type Dimension t d4 ... |
 |
GL-706 Low price manual adhesive tape log roll cutting machine | Продавец: Zhengzhou Guolian Machinery Co., Ltd. | GL-706 Low price manual adhesive tape log roll cutting machine Detailed description of manual ta... |
 |
Изготовленное на заказ освещение и освещение прессформы пластмассы впрыски Шэньчжэнь Китай | Продавец: TIPLAS INDUSTRIES LTD.(INJECTION MOLD/MOULD) | Имея богатый опыт в изготовлении пресс-форм для изготовления строительных конструкций, таких как ... |
 |
Ningbo Tizatech Screw Barrel for Plastic producing machine | Продавец: Ningbo Tianze Machinery Technology Co.,Ltd | Over 29 years experience in Screw barrel line ,wehave drawings for Haitian Chen Hsong etc . We h... |
|
|
Ningbo Tizatech Screw Barrel for Plastic producing machine | Продавец: Ningbo Tianze Machinery Technology Co.,Ltd | Over 29 years experience in Screw barrel line ,wehave drawings for Haitian Chen Hsong etc . We h... |
