Friction Charging Tester

• 

Standards compliant:
JIS L-1094;
JIS T-8118;
ZB W 04008-89;
GB / T12703.2-2009;
GB 12014-2009;
GB / T23316-2009

Calculation formula:
Q = CV / A
Here, C: the charge amount of the capacitor (F) = 0.1 × 10-6 (F)
V: Voltage reading of potentiometer (V)
A: friction area of ​​sample (m2) = 0.25 × 0.25 (m2)

Steps:
1, connecting the Faraday tube and the amount of charge measurement device: the end of a dedicated cable connected with the input of the charge meter connected to the other end of the Faraday tube with the outer cylinder of the socket connection.
2, turn on the charge amount of the tester power - the power switch up to the "1" position.
3, press the "clear" button, so that the charge meter shows the number is zero.
4, with a roller friction machine friction test, immediately after the end of the friction with the insulation rods into the Faraday tube tube inside the tube. In this process the specimen and other objects should be kept above 300mm.
5. Read the reading on the charge quantity measuring device.

Friction Charging TesterNote:

• 1, the system of Faraday tube outer cylinder should be reliably grounded.
• 2. Clear the charge amount measurement unit before each measurement.
• 3, the measured object must be measured from the power supply.
• 4, before the test, please turn on the power switch to make the machine warm up for 15 minutes.
• 5, voltage / current generator is not to sell goods.

• Fabric Friction Charging Charge Tester:

  Voltage meter (R8240): 1 set
  Capacitor: 1 set
  Cable (A01009-200): 1 root
  Connection cable (A01009-50): 1 root
  Power supply-type strip in addition to the electrode: 1 root
  Friction abutment / ground pad (nylon friction cloth): 1 set
  Insulated rods (20Φ x 500L mm acrylic clear fiber): 1 root
  Certificate of proof of voltage meter (traceability): 1 book

Другие товары поставщика

	Paper smoothness meter	Implementation standards: ISO 5627 Paper and board - Determination of smoothness （Buick method） GB/T 456 "Paper and board smoothness determinatio...
	Fabric horizontal burning tester	Standard QB/T 2729: Leather – Horizontal flammability test for physical and mechanical properties. ASTM D5132: Horizontal burning rate of p...
	Standard Helmet Visual Field Tester	Standards EN 1078:2023: Helmets for Pedal Cyclists, Skateboarders, and Roller Skaters CE Certification(Conformité Européenne) Equi...
	Цифровой автоматический тестер прочности на взрыв	Стандарты:ASTM D3786, ERT 80-4-20, GB/T 7742.1, BS EN ISO 13938-1, BS 3424-6-B, ISO 3303-B, ISO 2758, ISO 3303.2, ISO 3689, JIS L1018/L1093, IWS TM...
	Water injection counterweight dummy	Product Introduction 　　This counterweight dummy can be filled with water, the torso and the bottom are separated, independently filled with wat...

Похожие товары

	Custom Stainless Components for OEM Applications	Продавец: Yongjia County Yaokang Technology Co., Ltd.	Our stainless steel float balls are designed for float valves, water tanks, and industrial liquid...
	Precision Design for Automatic Liquid Level Control	Продавец: Yongjia County Yaokang Technology Co., Ltd.	Our stainless steel float balls are designed for liquid level control applications in valves, tan...
	"China manufacturer power supply VM-5H3 for power generation	Продавец: DONGFANG YOYIK (DEYANG) ENGNIEERING CO; LTD	"China manufacturer power supply VM-5H3 for power generation Is to use the generator sets of prof...
	Reliable Components for Water and Industrial Systems	Продавец: Yongjia County Yaokang Technology Co., Ltd.	The Stainless Steel Float Ball is designed for automatic liquid level control and fluid managem...
	Double Convex Lenses	Продавец: Shandong Yanggu Constant Crystal Optics, Inc	Double Convex Lensesare used in image relay applications, or for imaging objects at close conjuga...