Flat Crossarm Braces
1.Technical Parameters and DrawingsHE CodeDimensionsWt./100kgsABCECBF14-2626" (660.4)24" (609.6)1/4" (6.35)1 1/4"(31.75)104.33CBF14-2828" (711.2)26" (660.4)1/4" (6.35)1 1/4"(31.75)108.86CBF14-3030" (762.0)28" (711.2)1/4" (6.35)1 1/4"(31.75)115.67CBF14-3232" (812.8)30" (762.0)1/4" (6.35)1 1/4"(31.75)124.74CBF14-3434" (863.6)32" (812.8)1/4" (6.35)1 1/4"(31.75)133.81CBF14-3636" (914.4)34" (863.6)1/4" (6.35)1 1/4"(31.75)142.88CBF14-3838"(965.2)36" (914.4)1/4" (6.35)1 1/4"(31.75)151.95CBF732-2020"(508)18"(457.2)7/32"(5.56)1 7/32"(30.95)63.50CBF732-2626" (660.4)24" (609.6)7/32"(5.56)1 7/32"(30.95)83.91CBF732-2828" (711.2)26" (660.4)7/32"(5.56)1 7/32"(30.95)90.72CBF732-3030" (762.0)28" (711.2)7/32"(5.56)1 7/32"(30.95)97.52CBF732-3232" (812.8)30" (762.0)7/32"(5.56)1 7/32"(30.95)102.061. Tolerance: ±5% 2. All dimensions are in inch.3. Material: carbon steel 4. Finish: hot dip galvanized 5. Customized sizes are available at request.2.Product Description:Flat crossarm braces, used in pairs, are produced to align and support crossarms.The corners can be square or rounded. Rounded corners are designed to prevent damage and lower the possibility of injury.There are two punched mounting holes in different diameters at each end.Hole 7/16" is designed for crossarm mounting with 3/8" bolts; hole 9/16" is for pole mounting with 1/2" through bolt or lag screw.Minimum tensile strength for mounting holes is 7,000 pounds.Material high quality steel is hot dip galvanized to ASTM A153.The above are typical only, please consult Shanghai Herrajes for further information.3.Product Details:Name: flat crossarms, cross arm braces, flat braces, extension armsHS code: 7326Model: ANSI/ASMEPackage: bulk packing; palletized; as requiredTrademark: HE, as requiredOrigin: ChinaRaw material: carbon steel Q235Finish: HDGODM&OEM service: yesSample: available, FOCPayment term: T/T, 30% prepayment and 70% balance against B/LCertificate: ISODelivery time: 20-40 daysMOQ: 500kgsExport term: FOB; CIFProduction capacity pcs/day: 2000 Minimum tensile strength lbs.: 7000 Overall length in: 20, 26, 28, 30,etc.Mounting hole center in: 18, 24, 26,etc.Weight/100 kg: 104.33,etc.Hole dia. in: 7/16, 9/16Steel size in: 7/32 X 1-7/32, 1/4×1 1/4
Другие товары поставщика
|
|
|
1.Technical Parameters and DrawingsHE CodeDimensions(mm)Wt./1000ΦHΦDΦdLL1kgCCL-15.54.22.5±0.32075CCL-25.54.83.1±0.32173CCL-36.25.53.8±0.32493CCL-46... |
|
|
|
1.Technical Parameters and DrawingsHE CodeIMS-1HE CodeIMS-2HE CodeIMS-31. Tolerance: ±5% 2. All dimensions are in MM3. Material: carbon steel 4. ... |
|
|
|
1.Technical Parameters and Drawings
HE CodeDimensionsWt.Pipe dia.kgSMB-11 1/4" - 3"0.463Notes:1. Tolerance: ±5% 2. All dimensions are in In... |
|
|
|
1.Technical Parameters and DrawingsHE CodeDimensionsMin tensile strengthWt.LDlbskgDER5/8-1212" (305)5/8" (16)124000.617DER5/8-1414" (356)5/8" (16)1... |
|
|
|
1.Technical Parameters and DrawingsHE CodeDimensionsWt.Dia. inLength. ft.kgGR1/2-51/2"5'1.50GR1/2-61/2"6'1.79GR1/2-71/2"7'2.09GR5/8-65/8"6'2.72GR5/... |
Все товары поставщика
Похожие товары
