Flat Crossarm Braces
1.Technical Parameters and DrawingsHE CodeDimensionsWt./100kgsABCECBF14-2626" (660.4)24" (609.6)1/4" (6.35)1 1/4"(31.75)104.33CBF14-2828" (711.2)26" (660.4)1/4" (6.35)1 1/4"(31.75)108.86CBF14-3030" (762.0)28" (711.2)1/4" (6.35)1 1/4"(31.75)115.67CBF14-3232" (812.8)30" (762.0)1/4" (6.35)1 1/4"(31.75)124.74CBF14-3434" (863.6)32" (812.8)1/4" (6.35)1 1/4"(31.75)133.81CBF14-3636" (914.4)34" (863.6)1/4" (6.35)1 1/4"(31.75)142.88CBF14-3838"(965.2)36" (914.4)1/4" (6.35)1 1/4"(31.75)151.95CBF732-2020"(508)18"(457.2)7/32"(5.56)1 7/32"(30.95)63.50CBF732-2626" (660.4)24" (609.6)7/32"(5.56)1 7/32"(30.95)83.91CBF732-2828" (711.2)26" (660.4)7/32"(5.56)1 7/32"(30.95)90.72CBF732-3030" (762.0)28" (711.2)7/32"(5.56)1 7/32"(30.95)97.52CBF732-3232" (812.8)30" (762.0)7/32"(5.56)1 7/32"(30.95)102.061. Tolerance: ±5% 2. All dimensions are in inch.3. Material: carbon steel 4. Finish: hot dip galvanized 5. Customized sizes are available at request.2.Product Description:Flat crossarm braces, used in pairs, are produced to align and support crossarms.The corners can be square or rounded. Rounded corners are designed to prevent damage and lower the possibility of injury.There are two punched mounting holes in different diameters at each end.Hole 7/16" is designed for crossarm mounting with 3/8" bolts; hole 9/16" is for pole mounting with 1/2" through bolt or lag screw.Minimum tensile strength for mounting holes is 7,000 pounds.Material high quality steel is hot dip galvanized to ASTM A153.The above are typical only, please consult Shanghai Herrajes for further information.3.Product Details:Name: flat crossarms, cross arm braces, flat braces, extension armsHS code: 7326Model: ANSI/ASMEPackage: bulk packing; palletized; as requiredTrademark: HE, as requiredOrigin: ChinaRaw material: carbon steel Q235Finish: HDGODM&OEM service: yesSample: available, FOCPayment term: T/T, 30% prepayment and 70% balance against B/LCertificate: ISODelivery time: 20-40 daysMOQ: 500kgsExport term: FOB; CIFProduction capacity pcs/day: 2000 Minimum tensile strength lbs.: 7000 Overall length in: 20, 26, 28, 30,etc.Mounting hole center in: 18, 24, 26,etc.Weight/100 kg: 104.33,etc.Hole dia. in: 7/16, 9/16Steel size in: 7/32 X 1-7/32, 1/4×1 1/4
Other supplier products
|
|
Double Plates |
1.Technical Parameters and DrawingsHE CodeDescriptionDimensionsBolt dia.Min failing loadABKnDP-1Double plates8201670DP-2Double plates82016120DP-3Do... |
|
|
Ground Rods |
1.Technical Parameters and DrawingsHE CodeDimensionsWt.Dia. inLength. ft.kgGR1/2-51/2"5'1.50GR1/2-61/2"6'1.79GR1/2-71/2"7'2.09GR5/8-65/8"6'2.72GR5/... |
|
|
Arcing Horn |
1.Technical Parameters and DrawingsHE CodeDimensionsWt.VoltageΦDΦdLHh(kg)(KV)AH-114..2138AH-24..26161-230Notes:1. Tolerance: ±5% 2. All dimensions... |
|
|
Lag Screws |
1.Technical Parameters and DrawingsHE CodeDimensions(in)Wt./1000ΦDLThreaded LengthkgLS1/4-11/4"1"1" LS1/4-11/41/4"1 1/4" 9.07LS1/4-11/21/4"1 1/2" ... |
|
|
Guy Clips |
1.Technical Parameters and DrawingsHE CodeWire dia.Dimensions(mm)Wt.mmABCΦDERkgGC.06GC.20.14GC-106..15GC-129-11..22GC-1412..36GC.70.8GC.72.23Notes:... |
All supplier products
Same products
