.

Q125:bus bar AC 2000A clamp on current transformer

The model Q125 2000A current transformer clamp on measuring instrument can be used for a current vector for the copper bar or the power aluminum bus bar on-line detection. It can be applied for energy meter & power meter, Standard IEC61869 & CE. easy installation, measurement 3000A big current value. FEATURES Conforms to EN 61010, 600V CAT III; Large bus bar jaw opening designed; Holding wire diameter: φ120mm×50mm; Low phase shift for power measurement; Improved ergonomic design & easy operation; Output:5mA AC/A AC, 2.5mA AC/A AC, 1.666mA AC/A AC Nominal range: 1 to 1000AAC, 1 to 2000AAC, 1 to 3000AAC When less than 1A output, load capacity ≤20Ω; When 5A output, load 2.5VA; Basic parameters : Ratio:1000: 1 or 2000:1(customized) Accuracy class0.2%, 0.5%, 1% Primary current:0 - 3000A AC Secondary current: 0 - 5A AC (customized) Max. Cont. Input current:3600A Frequency range:40Hz-2000Hz Weight (g):1200 Max. jaw opening (mm):50


Отправить запрос, связаться с поставщиком

Кому: 782364
Ваш E-mail:
Текст письма:


Send to other suppliers

Другие товары поставщика

GF112D 1-PHASE ELECTRICITY METER TESTER
GF112D 1-PHASE ELECTRICITY METER TESTER TheGF112D is a portable one-phase power meter tester. It used for testing the error of single-phase power meter on spot. It can test harmonic,power...
пожалуйста
пожалуйста GF112D является 0,05, 0,1 или 0,2, Из-за того, что вы сказали, что у вас проблемы с самооценкой? И я не могу просто так взять и уйти. apparent powe...
GF102 PORTABLE 1-PHASE POWER METER TEST BENCH
GF102 PORTABLE 1-PHASE POWER METER TEST BENCH GF102 single-phase energy meter test bench used to test the AC energy meter error. It can test 1pc or 3pcs energy meters at the same time. The accu...
GF312D1 HANDHELD 3-PH ELECTRICITY METER CALIBRATOR
GF312D1 HANDHELD 3-PH ELECTRICITY METER CALIBRATOR GF312D1 is a handheld three-phase kWH meter calibrator.It mainly used on site. It has portable design and it can work 10 hours continuously when us...
D50: hall effect high linearity 0.1% 1000A AC/DC current clamp
D50: hall effect high linearity 0.1% 1000A AC/DC current clamp The Model D50 AC/DC hall effect current clamp is a portable 500A/1000Arms current probe with insulated BNC output cable that can accurately measure...
Все товары поставщика

Похожие товары

D50: hall effect high linearity 0.1% 1000A AC/DC current clamp
D50: hall effect high linearity 0.1% 1000A AC/DC current clamp Продавец: 782364 The Model D50 AC/DC hall effect current clamp is a portable 500A/1000Arms current probe with insu...
D20: voltage output 200A AC/DC CURRENT PROBE
D20: voltage output 200A AC/DC CURRENT PROBE Продавец: 782364 The Model D20 AC/DC current clamp is a portable 100A/200Arms current probe.The D20 is power by a ...
FQ-RCTA02: ROGOWSKI coil 3000A flexible current sensor with integrator
FQ-RCTA02: ROGOWSKI coil 3000A flexible current sensor with integrator Продавец: 782364 The FQ-RCTA02 rogowski coil flexible current sensor is designed for easy installed in tight space...
FQ-RCT02:6000A flexible ROGOWSK coil current sensor
FQ-RCT02:6000A flexible ROGOWSK coil current sensor Продавец: 782364 The FQ-RCT02 flexible current sensor is an AC current sensor composed of a flexible Rogowski coil...
Q150: split core 150mm 3000/5A current transformer clamp
Q150: split core 150mm 3000/5A current transformer clamp Продавец: 782364 The model Q150 current transformer clamp can be used in large current situation and cooperate to ...