10G SFP+ DAC
SFP+ Direct Attach Cables are compliant with the SFF-8431, SFF-8432 and SFF-8472 specifications. Various choices of wire gauge are available from 30 to 24 AWG with various choices of cable length (up to 7m).
Over the past more than two decades, as aprofessionalfiber supplierin Chian, T&S Communications has combined its proud expertise in ceramics materials, fiber optical connectivity, and transmission with powerful manufacturing and engineering capabilities to develop inspiring innovations and marketable optical communications products.
Features of10G Direct Attach Cable
Compliant with SFF-8431, 8432 and 8472.
Up to 10.3125Gbps data rate per channel
Up to 7m transmission
Single 3.3V power supply
Temperature Range: 0~ 70 °C
RoHS compliant
Applications of10G SFP+ Direct Attach Cable
Low EMI radiation Switches, servers and routers
Data Center networks
Storage area networks
High performance computing
Telecommunication and wireless infrastructure
Medical diagnostics and networking
Test and measurement equipment
Specifications of 10G SFP+ Direct Attach Cable
General Product Characteristics
High Speed Characteristics
Regulatory Compliance
|
QSFP+ DAC Specifications |
|
|
Number of Lanes |
Tx & Rx |
|
Channel Data Rate |
|
|
Operating Temperature |
0 to + 70°C |
|
Storage Temperature |
-40 to + 85°C |
|
Supply Voltage |
|
|
Electrical Interface |
38 pins edge connector |
|
Management Interface |
Serial, I2C |
Recommended Operation Condition of10G SFP+ Direct Attach Cable
|
Parameter |
Symbol |
Min |
Max |
Unit |
|
Operating Case Temperature |
Topc |
0 |
70 |
degC |
|
Storage Temperature |
Tst |
-40 |
85 |
degC |
|
Relative Humidity (non-condensation) |
RS |
35 |
60 |
% |
|
Supply Voltage |
VCC3 |
V |
||
|
Voltage on LVTTL Input |
Vilvttl |
-0.3 |
VCC3 +0.2 |
V |
|
Power Supply Current |
ICC3 |
- |
15 |
mA |
|
Total Power Consumption |
Pd |
- |
W |
Notes:
Stress or conditions exceed the above range may cause permanent damage to the device.
This is a stress rating only and functional operation of the device at these or any other conditions above those listed in the operational sections of this specification is not applied. Exposure to absolute maximum rating conditions for extended periods may affect device reliability.
Pin definition of10G SFP+ Direct Attach Cable
|
Pin |
Symbol |
Name/Description |
|
1 |
VEET [1] |
Transmitter Ground |
|
2 |
Tx_FAULT [2] |
Not used |
|
3 |
Tx_DIS [3] |
Not used |
|
4 |
SDA [2] |
2-wire Serial Interface Data Line |
|
5 |
SCL [2] |
2-wire Serial Interface Clock Line |
|
6 |
MOD_ABS [4] |
Module Absent. Grounded within the module |
|
7 |
RS0 [5] |
Not used |
|
8 |
RX_LOS [2] |
Loss of Signal indication. Logic 0 indicates normal operation |
|
9 |
RS1 [5] |
Not used |
|
10 |
VEER [1] |
Receiver Ground |
|
11 |
VEER [1] |
Receiver Ground |
|
12 |
RD- |
Receiver Inverted DATA out. AC Coupled |
|
13 |
RD+ |
Receiver DATA out. AC Coupled |
|
14 |
VEER [1] |
Receiver Ground |
|
15 |
VCCR |
Receiver Power Supply |
|
16 |
VCCT |
Transmitter Power Supply |
|
17 |
VEET [1] |
Transmitter Ground |
|
18 |
TD+ |
Transmitter DATA in. AC Coupled |
|
19 |
TD- |
Transmitter Inverted DATA in. AC Coupled |
|
20 |
VEET [1] |
Transmitter Ground |
Notes:
Mechanical Dimensions of10G SFP+ Direct Attach Cable
The connector is compatible with the SFF-8432 specification.
|
Length (m) |
Cable AWG |
|
1 |
30 |
|
3 |
30 |
|
5 |
24 |
|
7 |
24 |
Отправить запрос, связаться с поставщиком
Другие товары поставщика
 |
FBG ID REFLECTOR | FBG ID Reflector can be used in FTTX fiber trouble-shooting monitoring. The combination of the OTDR and FBG Reflector can detect and locate fiber f... |
 |
The Difference Between 100G QSFP28 Fiber Optical Transceiver and 100G CFP4 Fiber Optical Transceiver | The100g optical transceiveris an optoelectronic device that performs electro-optical and photoelectric conversion. The fiber optical transceiver is... |
 |
FIBER BRAGG GRATING MANUFACTURER | As the "Optical Fiber Sensing Engineering Technology R&D Center of Guangdong Province ", T&S fiber Bragg grating manufacturer takes the fro... |
 |
FBG OPTICAL BRAGG GRATTING SENSORS | Being a fiber optic sensor, a FBG sensor has all the advantages usually attributed to these devices, such as low loss relative to the fiber length,... |
 |
QSFP28 100G CWDM4 2K | QSFP28 100G CWDM4 2K The QSFP28 100G-CWDM4-2km module is a highly integrated 4x28G transceiver focused on reach, bandwidth, density and cost for hi... |
Похожие товары
 |
Corner Cube Prism | Продавец: Shandong Yanggu Constant Crystal Optics, Inc | Corner Cube prismhas three mutually perpendicular surfaces and a hypotenuse face. It operates on ... |
 |
Optical Glass 900nm Short Pass Filter | Продавец: Shandong Yanggu Constant Crystal Optics, Inc | Optical Glass 900nm Short Pass Filter Product Description Coating Type: Hard film Coated Techn... |
 |
Optical Filters Custom Kinds Of Substrate CLZ | Продавец: Changchun Long Ze Precision Optics Co., Ltd | Optical Filters Custom Kinds Of Substrate CLZ Product Description Optical Filter, an optical el... |
 |
WELINK MTP/MPO Adapters | Продавец: SHENZHEN WELINK TECHNOLOGY CO., LTD. | MTP/MPO Adapters can accurately connect two connectors and reduce connection loss, mainly used fo... |
 |
WELINK MTP/MPO Cabels | Продавец: SHENZHEN WELINK TECHNOLOGY CO., LTD. | MPO/mtp fiber optic cableare designed to avoid crowding and unmanageable data centers, consist of... |
