10G SFP+ DAC
SFP+ Direct Attach Cables are compliant with the SFF-8431, SFF-8432 and SFF-8472 specifications. Various choices of wire gauge are available from 30 to 24 AWG with various choices of cable length (up to 7m).
Over the past more than two decades, as aprofessionalfiber supplierin Chian, T&S Communications has combined its proud expertise in ceramics materials, fiber optical connectivity, and transmission with powerful manufacturing and engineering capabilities to develop inspiring innovations and marketable optical communications products.
Features of10G Direct Attach Cable
Compliant with SFF-8431, 8432 and 8472.
Up to 10.3125Gbps data rate per channel
Up to 7m transmission
Single 3.3V power supply
Temperature Range: 0~ 70 °C
RoHS compliant
Applications of10G SFP+ Direct Attach Cable
Low EMI radiation Switches, servers and routers
Data Center networks
Storage area networks
High performance computing
Telecommunication and wireless infrastructure
Medical diagnostics and networking
Test and measurement equipment
Specifications of 10G SFP+ Direct Attach Cable
General Product Characteristics
High Speed Characteristics
Regulatory Compliance
|
QSFP+ DAC Specifications |
|
|
Number of Lanes |
Tx & Rx |
|
Channel Data Rate |
|
|
Operating Temperature |
0 to + 70°C |
|
Storage Temperature |
-40 to + 85°C |
|
Supply Voltage |
|
|
Electrical Interface |
38 pins edge connector |
|
Management Interface |
Serial, I2C |
Recommended Operation Condition of10G SFP+ Direct Attach Cable
|
Parameter |
Symbol |
Min |
Max |
Unit |
|
Operating Case Temperature |
Topc |
0 |
70 |
degC |
|
Storage Temperature |
Tst |
-40 |
85 |
degC |
|
Relative Humidity (non-condensation) |
RS |
35 |
60 |
% |
|
Supply Voltage |
VCC3 |
V |
||
|
Voltage on LVTTL Input |
Vilvttl |
-0.3 |
VCC3 +0.2 |
V |
|
Power Supply Current |
ICC3 |
- |
15 |
mA |
|
Total Power Consumption |
Pd |
- |
W |
Notes:
Stress or conditions exceed the above range may cause permanent damage to the device.
This is a stress rating only and functional operation of the device at these or any other conditions above those listed in the operational sections of this specification is not applied. Exposure to absolute maximum rating conditions for extended periods may affect device reliability.
Pin definition of10G SFP+ Direct Attach Cable
|
Pin |
Symbol |
Name/Description |
|
1 |
VEET [1] |
Transmitter Ground |
|
2 |
Tx_FAULT [2] |
Not used |
|
3 |
Tx_DIS [3] |
Not used |
|
4 |
SDA [2] |
2-wire Serial Interface Data Line |
|
5 |
SCL [2] |
2-wire Serial Interface Clock Line |
|
6 |
MOD_ABS [4] |
Module Absent. Grounded within the module |
|
7 |
RS0 [5] |
Not used |
|
8 |
RX_LOS [2] |
Loss of Signal indication. Logic 0 indicates normal operation |
|
9 |
RS1 [5] |
Not used |
|
10 |
VEER [1] |
Receiver Ground |
|
11 |
VEER [1] |
Receiver Ground |
|
12 |
RD- |
Receiver Inverted DATA out. AC Coupled |
|
13 |
RD+ |
Receiver DATA out. AC Coupled |
|
14 |
VEER [1] |
Receiver Ground |
|
15 |
VCCR |
Receiver Power Supply |
|
16 |
VCCT |
Transmitter Power Supply |
|
17 |
VEET [1] |
Transmitter Ground |
|
18 |
TD+ |
Transmitter DATA in. AC Coupled |
|
19 |
TD- |
Transmitter Inverted DATA in. AC Coupled |
|
20 |
VEET [1] |
Transmitter Ground |
Notes:
Mechanical Dimensions of10G SFP+ Direct Attach Cable
The connector is compatible with the SFF-8432 specification.
|
Length (m) |
Cable AWG |
|
1 |
30 |
|
3 |
30 |
|
5 |
24 |
|
7 |
24 |
在线联系供应商
Other supplier products
 |
MT FERRULE | The MT ferrule is a multi-fiber, plastic ferrule with a square end-face of 6.4x2.5 mm and fiber pitch 0.25mm, widely applied in MPO connectors and ... |
 |
MTP®/MPO Harness Cable | MTP/MPOharness cables are a kind of MTP®/MPO fanout harness cable or breakout fiber optic harness assemblywith one MTP®/MPO connector on on... |
 |
PRE-TERMINATED MULTIFIBER CABLE | Pre terminated fiber cable assembliesconsist of optical fiber cable terminated with various types of connectors, such as the ST, FC, SC, LC, MU, MT... |
 |
CEX WDM | T&S Cex-WDM is a kind of coexistence WDM product, which is mainly used in optical fiber access network. It can use EPON/GPON network of 1 to 2.... |
 |
WDMS | T&S is an expert in manufacturing Wavelength Division Multiplexing (WDM). Our WDM fiberoptic products are relied upon by some of the large scal... |
Same products
 |
Corner Cube Prism | 卖方: Shandong Yanggu Constant Crystal Optics, Inc | Corner Cube prismhas three mutually perpendicular surfaces and a hypotenuse face. It operates on ... |
 |
Optical Glass 900nm Short Pass Filter | 卖方: Shandong Yanggu Constant Crystal Optics, Inc | Optical Glass 900nm Short Pass Filter Product Description Coating Type: Hard film Coated Techn... |
 |
Optical Filters Custom Kinds Of Substrate CLZ | 卖方: Changchun Long Ze Precision Optics Co., Ltd | Optical Filters Custom Kinds Of Substrate CLZ Product Description Optical Filter, an optical el... |
 |
WELINK MTP/MPO Adapters | 卖方: SHENZHEN WELINK TECHNOLOGY CO., LTD. | MTP/MPO Adapters can accurately connect two connectors and reduce connection loss, mainly used fo... |
 |
WELINK MTP/MPO Cabels | 卖方: SHENZHEN WELINK TECHNOLOGY CO., LTD. | MPO/mtp fiber optic cableare designed to avoid crowding and unmanageable data centers, consist of... |
