10G SFP+ DAC
SFP+ Direct Attach Cables are compliant with the SFF-8431, SFF-8432 and SFF-8472 specifications. Various choices of wire gauge are available from 30 to 24 AWG with various choices of cable length (up to 7m).
Over the past more than two decades, as aprofessionalfiber supplierin Chian, T&S Communications has combined its proud expertise in ceramics materials, fiber optical connectivity, and transmission with powerful manufacturing and engineering capabilities to develop inspiring innovations and marketable optical communications products.
Features of10G Direct Attach Cable
Compliant with SFF-8431, 8432 and 8472.
Up to 10.3125Gbps data rate per channel
Up to 7m transmission
Single 3.3V power supply
Temperature Range: 0~ 70 °C
RoHS compliant
Applications of10G SFP+ Direct Attach Cable
Low EMI radiation Switches, servers and routers
Data Center networks
Storage area networks
High performance computing
Telecommunication and wireless infrastructure
Medical diagnostics and networking
Test and measurement equipment
Specifications of 10G SFP+ Direct Attach Cable
General Product Characteristics
High Speed Characteristics
Regulatory Compliance
QSFP+ DAC Specifications |
|
Number of Lanes |
Tx & Rx |
Channel Data Rate |
|
Operating Temperature |
0 to + 70°C |
Storage Temperature |
-40 to + 85°C |
Supply Voltage |
|
Electrical Interface |
38 pins edge connector |
Management Interface |
Serial, I2C |
Recommended Operation Condition of10G SFP+ Direct Attach Cable
Parameter |
Symbol |
Min |
Max |
Unit |
Operating Case Temperature |
Topc |
0 |
70 |
degC |
Storage Temperature |
Tst |
-40 |
85 |
degC |
Relative Humidity (non-condensation) |
RS |
35 |
60 |
% |
Supply Voltage |
VCC3 |
V |
||
Voltage on LVTTL Input |
Vilvttl |
-0.3 |
VCC3 +0.2 |
V |
Power Supply Current |
ICC3 |
- |
15 |
mA |
Total Power Consumption |
Pd |
- |
W |
Notes:
Stress or conditions exceed the above range may cause permanent damage to the device.
This is a stress rating only and functional operation of the device at these or any other conditions above those listed in the operational sections of this specification is not applied. Exposure to absolute maximum rating conditions for extended periods may affect device reliability.
Pin definition of10G SFP+ Direct Attach Cable
Pin |
Symbol |
Name/Description |
1 |
VEET [1] |
Transmitter Ground |
2 |
Tx_FAULT [2] |
Not used |
3 |
Tx_DIS [3] |
Not used |
4 |
SDA [2] |
2-wire Serial Interface Data Line |
5 |
SCL [2] |
2-wire Serial Interface Clock Line |
6 |
MOD_ABS [4] |
Module Absent. Grounded within the module |
7 |
RS0 [5] |
Not used |
8 |
RX_LOS [2] |
Loss of Signal indication. Logic 0 indicates normal operation |
9 |
RS1 [5] |
Not used |
10 |
VEER [1] |
Receiver Ground |
11 |
VEER [1] |
Receiver Ground |
12 |
RD- |
Receiver Inverted DATA out. AC Coupled |
13 |
RD+ |
Receiver DATA out. AC Coupled |
14 |
VEER [1] |
Receiver Ground |
15 |
VCCR |
Receiver Power Supply |
16 |
VCCT |
Transmitter Power Supply |
17 |
VEET [1] |
Transmitter Ground |
18 |
TD+ |
Transmitter DATA in. AC Coupled |
19 |
TD- |
Transmitter Inverted DATA in. AC Coupled |
20 |
VEET [1] |
Transmitter Ground |
Notes:
Mechanical Dimensions of10G SFP+ Direct Attach Cable
The connector is compatible with the SFF-8432 specification.
Length (m) |
Cable AWG |
1 |
30 |
3 |
30 |
5 |
24 |
7 |
24 |
Send product request
Other supplier products
TFF 1310/1550NM FWDM | T&S FWDMDevice is a product that can customize the transmission band or the reflection band within the wavelength range of 1260-1680nm; it can ... | |
PLC CHIP | PLC CHIP As a professional plc splitter manufacturer, T&S provides a wide range of different fiber optic components at reasonable prices. Based... | |
MT FERRULE | The MT ferruleis a multi-fiber, plastic ferrule with a square end-face of 6.4x2.5 mm and fiber pitch 0.25mm, widely applied in MPO connectors and A... | |
FIBER BRAGG GRATING | As the "Optical Fiber Sensing Engineering Technology R&D Center of Guangdong Province ", T&S fiber Bragg grating manufacturertakes the fron... | |
FIBER BRAGG GRATING | As the " Optical Fiber Sensing Engineering Technology R&D Center of Guangdong Province, T&S takes the frontier application and development ... |
Same products
WELINK MTP/MPO Adapters | Seller: SHENZHEN WELINK TECHNOLOGY CO., LTD. | MTP/MPO Adapters can accurately connect two connectors and reduce connection loss, mainly used fo... | |
WELINK MTP/MPO Cabels | Seller: SHENZHEN WELINK TECHNOLOGY CO., LTD. | MPO/mtp fiber optic cableare designed to avoid crowding and unmanageable data centers, consist of... | |
Micro Data Centre | Seller: SHENZHEN WELINK TECHNOLOGY CO., LTD. | A micro data center(MDC) is a small modular data center designed for computer workloads that do n... | |
WELINK Metal Distribution Boxes | Seller: SHENZHEN WELINK TECHNOLOGY CO., LTD. | Metal Distribution Boxrefers to the box made of cold rolled plate, aluminum plate or stainless st... | |
WELINK Metal Cross-Connect Cabinet | Seller: SHENZHEN WELINK TECHNOLOGY CO., LTD. | Metal cross-connect cabinet is currently being widely used in outside environment. It provides mo... |