Print rub tester / Ink Rub Tester

• 

Product Introduction:

Print friction testing machine is suitable for print, ink, photosensitive layer of PS plate, gloss oil and related products surface wear resistance test, effective analysis of print friction resistance, ink layer off, PS plate printing resistance is low and other products coating hardness is poor. Friction testing machine using microcomputer control system, users only need to install the sample to be tested, the instrument will automatically complete the whole test process. It is widely used in printing enterprises, packaging enterprises, quality inspection and other units.

Meet the standard:

GB/T 7706-2008

Test principle:

The friction test is carried out on the surface of the printed matter under a certain pressure. After a certain number of times, the sample is taken off to test the surface density. The ratio between the clean offset paper and the pre-friction is the wear resistance of the ink layer.

Product Advantages:

Measures Key Durability Property: Quantifies the resistance of printed surfaces and coatings to friction and abrasion.

Standard Compliant: Designed to meet specific national standards for rub resistance testing of printed matter (GB/T 7706).

Versatile Material Testing: Applicable to a range of printed materials, inks, coatings, and related surfaces.

Controllable Test Parameters: Allows for precise control of friction pressure, speed, and the number of cycles.

Automatic Test Process: Microcomputer control enables automated testing for consistency and efficiency.

Provides Objective Assessment: The principle involving density measurement allows for a quantitative evaluation of wear.

Scope of application:

Printed matter: Test of wear resistance of surface layer

Ink: ink, polish wear resistance test

Paper packaging: The paper packaging of printed matter of poor friction and other products coating hardness difference test

Technical parameters:

Friction pressure: 20±0.2N(different pressure can be customized)

Friction speed: 21. 43. 85. 106r/min adjustable

Friction area: 100(L)mm×50(B)mm

Friction stroke: 60mm

Friction Times: 0 —— 999999 Times

Sample size: 230(L)mm×50(B)mm

Power supply: 220V 50Hz

Environment requirements: Temperature: 15℃-35℃， relative humidity: not more than 70%, no condensation

Standard configuration:

Main engine, standard friction block

Другие товары поставщика

	Shoe Shank Stiffness Tester	Get a quote： Whats/App: +86 181 0160 0864 Web: gellowen.co.uk Get a quote： Whats/App: +86 181 0160 0864 Web: gellowen.co.uk The sand bath com...
	High and low temperature universal creep testing machine	Get a quote： Whats/App: +86 181 0160 0864 Web: gellowen.co.uk The High and Low Temperature Universal Creep Testing Machine is designed for long-...
	Medical needle toughness tester	Get a quote： Whats/App: +86 181 0160 0864 Web: gellowen.co.uk The Medical Needle Toughness Tester is designed to evaluate the mechanical strengt...
	Car Crash Test Dummies(Hybrid iii Dummys)	Get a quote： Whats/App: +86 181 0160 0864 Web: gellowen.co.uk The “triple-collision dummies” do not refer to a single standardized t...
	NES 713 Navy Engineering Smoke Toxicity Test Chamber	Get a quote： Whats/App: +86 181 0160 0864 Web: gellowen.co.uk The NES 713 Navy Engineering Smoke Toxicity Test Chamber is a specialized fire tes...

Похожие товары

	Bottle Wall and Bottom Thickness Tester	Продавец: Standard Group (Hong Kong) Limited	The wall and bottom thickness tester for bottles is a measuring instrument widely used in the pha...
	Pinhole Tester / Pinhole Testing Equipment	Продавец: Standard Group (Hong Kong) Limited	The pinhole tester for aluminum foil is a device specifically used to detect micro - pinholes in ...
	Cork Puncture and Chip Detection Instrument	Продавец: Standard Group (Hong Kong) Limited	The rubber stopper puncture debris detector is a device specifically used to detect the number of...
	Aluminum Ointment Tube Toughness Tester	Продавец: Standard Group (Hong Kong) Limited	The ductility tester for aluminum tubes is a device specifically used to detect the ductility ind...
	Vacuum leak tester / Vacuum leak instrument	Продавец: Standard Group (Hong Kong) Limited	Vacuum Decay Leak Tester specializes in the detection of leaks in ampoules, vials, injection bott...