Print rub tester / Ink Rub Tester
Product Introduction:
Print friction testing machine is suitable for print, ink, photosensitive layer of PS plate, gloss oil and related products surface wear resistance test, effective analysis of print friction resistance, ink layer off, PS plate printing resistance is low and other products coating hardness is poor. Friction testing machine using microcomputer control system, users only need to install the sample to be tested, the instrument will automatically complete the whole test process. It is widely used in printing enterprises, packaging enterprises, quality inspection and other units.
Meet the standard:
GB/T 7706-2008
Test principle:
The friction test is carried out on the surface of the printed matter under a certain pressure. After a certain number of times, the sample is taken off to test the surface density. The ratio between the clean offset paper and the pre-friction is the wear resistance of the ink layer.
Product Advantages:
Measures Key Durability Property: Quantifies the resistance of printed surfaces and coatings to friction and abrasion.
Standard Compliant: Designed to meet specific national standards for rub resistance testing of printed matter (GB/T 7706).
Versatile Material Testing: Applicable to a range of printed materials, inks, coatings, and related surfaces.
Controllable Test Parameters: Allows for precise control of friction pressure, speed, and the number of cycles.
Automatic Test Process: Microcomputer control enables automated testing for consistency and efficiency.
Provides Objective Assessment: The principle involving density measurement allows for a quantitative evaluation of wear.
Scope of application:
Printed matter: Test of wear resistance of surface layer
Ink: ink, polish wear resistance test
Paper packaging: The paper packaging of printed matter of poor friction and other products coating hardness difference test
Technical parameters:
Friction pressure: 20±0.2N(different pressure can be customized)
Friction speed: 21. 43. 85. 106r/min adjustable
Friction area: 100(L)mm×50(B)mm
Friction stroke: 60mm
Friction Times: 0 —— 999999 Times
Sample size: 230(L)mm×50(B)mm
Power supply: 220V 50Hz
Environment requirements: Temperature: 15℃-35℃， relative humidity: not more than 70%, no condensation
Standard configuration:
Main engine, standard friction block
在线联系供应商
Other supplier products
 |
Standard light source sample table ISO 3664 | Standards ISO 3664:2009: Meets international standards for graphic arts and photography view conditions. DIN 6173-2: European norm for illuminant... |
 |
Abrasion testing machine / Abrasion Testers | Product Introduction Wear testing machine is used with the balance, specially testing the wear resistance of rubber products such as soles, tires,... |
 |
Sweating Thermal Manikin | Standards compliant ISO 15831：2004(E) Clothing-Physiological effects -Measurement of ASTM F 1291-04Standard Test Method for Measuring the Thermal... |
 |
Film Heat Shrinkage Tester ASTM D2732 | The film heat shrinkage rate tester is a device specifically designed to measure the shrinkage performance of film materials under heating conditio... |
 |
Vertical low temperature cold resistance testing machine / Vertical low temperature cold resistance tester | Product description: This machine is used to test finished shoes, rubber, plastic, soles, synthetic leather and other cold resistance degree to un... |
Same products
 |
Bottle Wall and Bottom Thickness Tester | 卖方: Standard Group (Hong Kong) Limited | The wall and bottom thickness tester for bottles is a measuring instrument widely used in the pha... |
 |
Pinhole Tester / Pinhole Testing Equipment | 卖方: Standard Group (Hong Kong) Limited | The pinhole tester for aluminum foil is a device specifically used to detect micro - pinholes in ... |
 |
Cork Puncture and Chip Detection Instrument | 卖方: Standard Group (Hong Kong) Limited | The rubber stopper puncture debris detector is a device specifically used to detect the number of... |
 |
Aluminum Ointment Tube Toughness Tester | 卖方: Standard Group (Hong Kong) Limited | The ductility tester for aluminum tubes is a device specifically used to detect the ductility ind... |
 |
Vacuum leak tester / Vacuum leak instrument | 卖方: Standard Group (Hong Kong) Limited | Vacuum Decay Leak Tester specializes in the detection of leaks in ampoules, vials, injection bott... |
