Schopper Folding Endurance Tester ISO 5626

Use and Scope of application:

1. the instrument is suitable for tensile strength greater than 1.33kn/m, thickness less than 0.25mm paper folding determination.

2. the instrument structure parameters and technical performance are in line with GB/T457-2008 "Paper folding resistance determination method" and other relevant standards.

Implementation standards:

GB/T457-2008

ISO 5626

Product Advantages:

Measures Key Durability Property: Quantifies folding endurance, a direct measure of a paper's resistance to repeated folding, crucial for many applications.

Standard Compliant (Schopper Method): Operates according to established national and international Schopper folding endurance testing standards.

Quantitative Result: Provides an objective numerical value (number of folds to break) for folding endurance.

Controllable Test Parameters: Allows for setting and maintaining specific test tension and folding rate as required by the standards.

Suitable for Specified Paper Types: Designed to accurately test papers within defined tensile strength and thickness ranges.

Product Features:

Folding head mechanism consisting of two oscillating folding rollers.

Clamping system to hold the paper strip specimen at both ends.

Tensioning mechanism to apply and maintain the specified initial and maximum tensile load on the sample during the test (Initial tension: 7.55 ± 0.10 N, Maximum tension: 9.81 ± 0.10 N).

Counter to record the number of double folds (cycles) the sample withstands before rupture, with a counting range of 0-9999 times.

Reciprocating folding action at a controlled rate (110 ± 10 times/min).

Folding rollers with a specific diameter (6mm).

Precise spacing between the folding roller and the folding roller (0.30mm) and between the folding rollers themselves (0.5mm).

Specific distance between the chucks of the same group (90 ± 0.5mm).

Designed to test paper within a maximum thickness limit (0.25mm).

Technical parameters:

1. the maximum measurement thickness :0.25mm

2. folded film thickness :0.5±0.05mm

3. sample load: initial tension :7.55±0.10N Maximum tension :9.81±0.10N

4. reciprocating folding rate :110±10 times /min

5. folding roller diameter :6mm

6. folding roller and folding roller spacing :0.30mm

7. folding roller spacing :0.5mm

8. the same group chuck distance :90±0.5mm

9. counter counting range :0-9999 times

10. power supply :220V±10%50Hz

Другие товары поставщика

	Heel Fatigue Tester ISO 19956	Heel Fatigue Tester is used to determine the resistance of medium and high heels of ladies’ shoes under repeated small impacts to the heel ti...
	Suture Needle Penetration and Bending Strength Tester	Get a quote： Whats/App: +86 181 0160 0864 Web: gellowen.co.uk The Suture Needle Penetration and Bending Strength Tester is a device used to test...
	Camera test light box ISO 12233	Standard ISO 12233: Compliant with SFR (Spatial Frequency Response) testing for lens resolution. IEC 62679: Photometric requirements for video ca...
	Shoe peeling strength tester BS 20344	Product Introduction: Upper peeling strength tester is suitable for testing the peeling strength between the sole and the upper of the shoe, the p...
	Glow wire tester	Get a quote： Whats/App: +86 181 0160 0864 Web: gellowen.co.uk F242 Glow-wire tester simulates thermal stress from heat sources to test circuit c...

Все товары поставщика

Похожие товары

	Bottle Wall and Bottom Thickness Tester	Продавец: Standard Group (Hong Kong) Limited	The wall and bottom thickness tester for bottles is a measuring instrument widely used in the pha...
	Pinhole Tester / Pinhole Testing Equipment	Продавец: Standard Group (Hong Kong) Limited	The pinhole tester for aluminum foil is a device specifically used to detect micro - pinholes in ...
	Cork Puncture and Chip Detection Instrument	Продавец: Standard Group (Hong Kong) Limited	The rubber stopper puncture debris detector is a device specifically used to detect the number of...
	Aluminum Ointment Tube Toughness Tester	Продавец: Standard Group (Hong Kong) Limited	The ductility tester for aluminum tubes is a device specifically used to detect the ductility ind...
	Vacuum leak tester / Vacuum leak instrument	Продавец: Standard Group (Hong Kong) Limited	Vacuum Decay Leak Tester specializes in the detection of leaks in ampoules, vials, injection bott...