Schopper Folding Endurance Tester ISO 5626
Use and Scope of application:
1. the instrument is suitable for tensile strength greater than 1.33kn/m, thickness less than 0.25mm paper folding determination.
2. the instrument structure parameters and technical performance are in line with GB/T457-2008 "Paper folding resistance determination method" and other relevant standards.
Implementation standards:
GB/T457-2008
ISO 5626
Product Advantages:
Measures Key Durability Property: Quantifies folding endurance, a direct measure of a paper's resistance to repeated folding, crucial for many applications.
Standard Compliant (Schopper Method): Operates according to established national and international Schopper folding endurance testing standards.
Quantitative Result: Provides an objective numerical value (number of folds to break) for folding endurance.
Controllable Test Parameters: Allows for setting and maintaining specific test tension and folding rate as required by the standards.
Suitable for Specified Paper Types: Designed to accurately test papers within defined tensile strength and thickness ranges.
Product Features:
Folding head mechanism consisting of two oscillating folding rollers.
Clamping system to hold the paper strip specimen at both ends.
Tensioning mechanism to apply and maintain the specified initial and maximum tensile load on the sample during the test (Initial tension: 7.55 ± 0.10 N, Maximum tension: 9.81 ± 0.10 N).
Counter to record the number of double folds (cycles) the sample withstands before rupture, with a counting range of 0-9999 times.
Reciprocating folding action at a controlled rate (110 ± 10 times/min).
Folding rollers with a specific diameter (6mm).
Precise spacing between the folding roller and the folding roller (0.30mm) and between the folding rollers themselves (0.5mm).
Specific distance between the chucks of the same group (90 ± 0.5mm).
Designed to test paper within a maximum thickness limit (0.25mm).
Technical parameters:
1. the maximum measurement thickness :0.25mm
2. folded film thickness :0.5±0.05mm
3. sample load: initial tension :7.55±0.10N Maximum tension :9.81±0.10N
4. reciprocating folding rate :110±10 times /min
5. folding roller diameter :6mm
6. folding roller and folding roller spacing :0.30mm
7. folding roller spacing :0.5mm
8. the same group chuck distance :90±0.5mm
9. counter counting range :0-9999 times
10. power supply :220V±10%50Hz
在线联系供应商
Other supplier products
 |
Geotextile Dynamic Puncture Tester ISO 13433 | Scope of application: It is used to test the penetration ability of various geomaterials to resist steel cones falling from a fixed height, so as ... |
 |
Gloss Meter ASTM D523 | Standard The SpectroColor Pro S Series Gloss Meter adheres to stringent automotive interior quality control standards, includingISO 2813. ASTM D52... |
 |
Pinhole Tester / Pinhole Testing Equipment | The pinhole tester for aluminum foil is a device specifically used to detect micro - pinholes in aluminum foil materials. The following is a detail... |
 |
Geomembrane Environmental Stress Cracking Resistance Tester | Scope of application: The stress cracking strength of polyolefin geomembrane was measured and evaluated by notch constant load tensile test. Durin... |
 |
Gas engine filter tester ISO 4548 | Product Introduction: The gas engine filter is an efficient filtration equipment used to filter and exclude impurities in the medium in the pipeli... |
Same products
 |
Bottle Wall and Bottom Thickness Tester | 卖方: Standard Group (Hong Kong) Limited | The wall and bottom thickness tester for bottles is a measuring instrument widely used in the pha... |
|
|
Pinhole Tester / Pinhole Testing Equipment | 卖方: Standard Group (Hong Kong) Limited | The pinhole tester for aluminum foil is a device specifically used to detect micro - pinholes in ... |
 |
Cork Puncture and Chip Detection Instrument | 卖方: Standard Group (Hong Kong) Limited | The rubber stopper puncture debris detector is a device specifically used to detect the number of... |
 |
Aluminum Ointment Tube Toughness Tester | 卖方: Standard Group (Hong Kong) Limited | The ductility tester for aluminum tubes is a device specifically used to detect the ductility ind... |
 |
Vacuum leak tester / Vacuum leak instrument | 卖方: Standard Group (Hong Kong) Limited | Vacuum Decay Leak Tester specializes in the detection of leaks in ampoules, vials, injection bott... |
