Shoe peeling strength tester BS 20344

• 

Product Introduction:

Upper peeling strength tester is suitable for testing the peeling strength between the sole and the upper of the shoe, the principle is to load the shoe on the shoe last clamp on the machine, peel the sole and the upper joint with the peeling knife, measure the force required when stripping force is the peeling force, and then calculate the peeling strength according to the peeling force and the width of the knife edge.

Reference Standard:

GB/T 15107-2013. GB/T 3903.3-2011. BS 20344. QB/T 4329-2012. QB/T 1002-2015.6.5 and other standards

Product Advantages:

Measures Key Bond Strength: Quantifies the adhesion strength between the sole and upper, a vital indicator of shoe durability.

Standard Compliant: Designed to meet numerous national and international standards for whole shoe peel strength testing.

Quantitative Result: Provides an objective numerical value (peeling force and calculated peeling strength) for the bond quality.

Controllable Test Parameters: Allows for precise control of the peeling speed, ensuring consistent test conditions.

Accurate Measurement: Utilizes a force sensor to accurately measure the peeling force.

Suitable for Finished Shoes: Designed to test complete shoes, simulating real-world stress on the sole-to-upper bond.

Adjustable for Different Shoe Sizes: Features adjustable components to accommodate a range of shoe sizes and shapes.

Product Features:

Based on the provided parameters and the whole shoe peel test principle:

Shoe last clamp or universal fixture system designed to securely hold a shoe in position during the test.

Peeling knife with specific, interchangeable widths (20 ± 0.2mm and 10 ± 0.1mm) used to initiate and control the separation of the sole from the upper.

Electric motor and control system for controlled downward movement of the peeling knife edge at an adjustable speed (20 ± 2 mm/min, with adjustable rise and fall speeds).

Force sensor or load cell integrated into the mechanism to measure the peeling force required to separate the sole from the upper.

System to calculate the peeling strength based on the measured force and the specified knife width.

Adjustable positioning rod and tie rod spacing (50-70mm adjustable) to accommodate different shoe sizes and sole configurations.

Dial gauge with a specified range (0.001-10mm) and accuracy (0.001) likely used to measure the progress of the peel or displacement.

Average lifting range (40mm) specifying the distance the peeling action can occur.

Electric operation powered by AC220V.

Robust construction suitable for testing finished footwear.

Другие товары поставщика

	Mask BFE Testing Machine - G299 丨Mask Bacterial Filtration Efficiency Tester	Mask BFE Testing Machineis used to test the percentage of material containing bacterial suspended particles at a specific flow rate. Features 1. ...
	Shoelace Abrasion Tester / SATRA TM93 / QB/T2226	Standards SATRA TM93、DIN-4843、QB/T2226、SATRA TM154 Principle Let shoelace cross the eyelet clamped on the fiber board, make the shoelace and eye...
	ink abrasion tester / Ink Abrasion Resistance Tester Ink Rub Tester	Ink abrasion testerPrinciple: To be ground layer and Friction Paper of the Ink Abrasion tester samples, under the action of the load friction body...
	Computer controlled electronic universal testing machine	Product Introduction 1. Meet the standard "GB/6344-2018 soft foam polymer tensile strength and elongation at break determination, GB/T6669-2008 fo...
	Taber Abrasion Tester (Double-Head)	Standards DIN Standards: DIN 53754 (plastics), DIN 53109 (paper/board), DIN 52347 (glass/plastics) ASTM Standards: ASTM D1044 (transparent plas...

Похожие товары

	Bottle Wall and Bottom Thickness Tester	Продавец: Standard Group (Hong Kong) Limited	The wall and bottom thickness tester for bottles is a measuring instrument widely used in the pha...
	Pinhole Tester / Pinhole Testing Equipment	Продавец: Standard Group (Hong Kong) Limited	The pinhole tester for aluminum foil is a device specifically used to detect micro - pinholes in ...
	Cork Puncture and Chip Detection Instrument	Продавец: Standard Group (Hong Kong) Limited	The rubber stopper puncture debris detector is a device specifically used to detect the number of...
	Aluminum Ointment Tube Toughness Tester	Продавец: Standard Group (Hong Kong) Limited	The ductility tester for aluminum tubes is a device specifically used to detect the ductility ind...
	Vacuum leak tester / Vacuum leak instrument	Продавец: Standard Group (Hong Kong) Limited	Vacuum Decay Leak Tester specializes in the detection of leaks in ampoules, vials, injection bott...