Shoe peeling strength tester BS 20344
Product Introduction:
Upper peeling strength tester is suitable for testing the peeling strength between the sole and the upper of the shoe, the principle is to load the shoe on the shoe last clamp on the machine, peel the sole and the upper joint with the peeling knife, measure the force required when stripping force is the peeling force, and then calculate the peeling strength according to the peeling force and the width of the knife edge.
Reference Standard:
GB/T 15107-2013. GB/T 3903.3-2011. BS 20344. QB/T 4329-2012. QB/T 1002-2015.6.5 and other standards
Product Advantages:
Measures Key Bond Strength: Quantifies the adhesion strength between the sole and upper, a vital indicator of shoe durability.
Standard Compliant: Designed to meet numerous national and international standards for whole shoe peel strength testing.
Quantitative Result: Provides an objective numerical value (peeling force and calculated peeling strength) for the bond quality.
Controllable Test Parameters: Allows for precise control of the peeling speed, ensuring consistent test conditions.
Accurate Measurement: Utilizes a force sensor to accurately measure the peeling force.
Suitable for Finished Shoes: Designed to test complete shoes, simulating real-world stress on the sole-to-upper bond.
Adjustable for Different Shoe Sizes: Features adjustable components to accommodate a range of shoe sizes and shapes.
Product Features:
Based on the provided parameters and the whole shoe peel test principle:
Shoe last clamp or universal fixture system designed to securely hold a shoe in position during the test.
Peeling knife with specific, interchangeable widths (20 ± 0.2mm and 10 ± 0.1mm) used to initiate and control the separation of the sole from the upper.
Electric motor and control system for controlled downward movement of the peeling knife edge at an adjustable speed (20 ± 2 mm/min, with adjustable rise and fall speeds).
Force sensor or load cell integrated into the mechanism to measure the peeling force required to separate the sole from the upper.
System to calculate the peeling strength based on the measured force and the specified knife width.
Adjustable positioning rod and tie rod spacing (50-70mm adjustable) to accommodate different shoe sizes and sole configurations.
Dial gauge with a specified range (0.001-10mm) and accuracy (0.001) likely used to measure the progress of the peel or displacement.
Average lifting range (40mm) specifying the distance the peeling action can occur.
Electric operation powered by AC220V.
Robust construction suitable for testing finished footwear.
在线联系供应商
Other supplier products
 |
Density Gradient Column Apparatus丨Density Gradient Column System | Scope of application: Used for the measurement of density and relative density of plastics and other materials, the instrument adopts the Archimed... |
 |
Film impact tester ISO 6272 | Product Introduction The film impact testing machine, through the hemispherical punch at a certain speed, impacts and passes through the film samp... |
 |
RIDER Method Single Fiber Friction Tester | Meet the standard: JIS L1015 (Chemical fiber binding test method)， JIS L 1095 (General yarn test method)/friction coefficient Purpose: This inst... |
 |
Foam cutter / Foam cutter machine | Standards JB/T 11346-2013 EN 12100 UNE-EN 14886:2008 Scope of application This machine is mainly used for cutting foam materials, which can cu... |
 |
Catheter Friction Tester / Catheter Friction Equipment | Standard YY/T 1536 - 2017 TCAMDI 021 - 2019 Main Uses The catheter friction performance tester is a professional instrument used to detect the ... |
Same products
 |
Bottle Wall and Bottom Thickness Tester | 卖方: Standard Group (Hong Kong) Limited | The wall and bottom thickness tester for bottles is a measuring instrument widely used in the pha... |
 |
Pinhole Tester / Pinhole Testing Equipment | 卖方: Standard Group (Hong Kong) Limited | The pinhole tester for aluminum foil is a device specifically used to detect micro - pinholes in ... |
 |
Cork Puncture and Chip Detection Instrument | 卖方: Standard Group (Hong Kong) Limited | The rubber stopper puncture debris detector is a device specifically used to detect the number of... |
 |
Aluminum Ointment Tube Toughness Tester | 卖方: Standard Group (Hong Kong) Limited | The ductility tester for aluminum tubes is a device specifically used to detect the ductility ind... |
 |
Vacuum leak tester / Vacuum leak instrument | 卖方: Standard Group (Hong Kong) Limited | Vacuum Decay Leak Tester specializes in the detection of leaks in ampoules, vials, injection bott... |
