Shoe peeling strength tester BS 20344
Product Introduction:
Upper peeling strength tester is suitable for testing the peeling strength between the sole and the upper of the shoe, the principle is to load the shoe on the shoe last clamp on the machine, peel the sole and the upper joint with the peeling knife, measure the force required when stripping force is the peeling force, and then calculate the peeling strength according to the peeling force and the width of the knife edge.
Reference Standard:
GB/T 15107-2013. GB/T 3903.3-2011. BS 20344. QB/T 4329-2012. QB/T 1002-2015.6.5 and other standards
Product Advantages:
Measures Key Bond Strength: Quantifies the adhesion strength between the sole and upper, a vital indicator of shoe durability.
Standard Compliant: Designed to meet numerous national and international standards for whole shoe peel strength testing.
Quantitative Result: Provides an objective numerical value (peeling force and calculated peeling strength) for the bond quality.
Controllable Test Parameters: Allows for precise control of the peeling speed, ensuring consistent test conditions.
Accurate Measurement: Utilizes a force sensor to accurately measure the peeling force.
Suitable for Finished Shoes: Designed to test complete shoes, simulating real-world stress on the sole-to-upper bond.
Adjustable for Different Shoe Sizes: Features adjustable components to accommodate a range of shoe sizes and shapes.
Product Features:
Based on the provided parameters and the whole shoe peel test principle:
Shoe last clamp or universal fixture system designed to securely hold a shoe in position during the test.
Peeling knife with specific, interchangeable widths (20 ± 0.2mm and 10 ± 0.1mm) used to initiate and control the separation of the sole from the upper.
Electric motor and control system for controlled downward movement of the peeling knife edge at an adjustable speed (20 ± 2 mm/min, with adjustable rise and fall speeds).
Force sensor or load cell integrated into the mechanism to measure the peeling force required to separate the sole from the upper.
System to calculate the peeling strength based on the measured force and the specified knife width.
Adjustable positioning rod and tie rod spacing (50-70mm adjustable) to accommodate different shoe sizes and sole configurations.
Dial gauge with a specified range (0.001-10mm) and accuracy (0.001) likely used to measure the progress of the peel or displacement.
Average lifting range (40mm) specifying the distance the peeling action can occur.
Electric operation powered by AC220V.
Robust construction suitable for testing finished footwear.
Send product request
Other supplier products
 |
New warm body dummy tester | Product Description In addition to heat dissipation to the surrounding environment through conduction, convection and radiation, the human body al... |
 |
Rubber non-rotor vulcanization Tester丨 Rubber Testing Instruments | Product Introduction: Non-rotor vulcanizer is a rubber processing industry control rubber material quality, rapid inspection and rubber basic rese... |
 |
Footwear Flexing Tester SATRA TM92 | Product Introduction: The finished shoe resistance zigzag tester drives the zigzag part of the finished shoe to zigzag repeatedly with the zigzag ... |
 |
EN sole bending tester SATRA TM161 | Product Introduction: The EN sole bending tester is used for 90 degree bending test of the sole of rubber, EVA and other zigzag shoes to detect it... |
 |
Shoe heat insulation testing machine -- sand bath | Standard GB/T 20991: Determines thermal insulation of safety shoe soles under simulated hot surface exposure. EN ISO 20344: European standard for... |
Same products
 |
Bottle Wall and Bottom Thickness Tester | Seller: Standard International Group (HK) Limited | The wall and bottom thickness tester for bottles is a measuring instrument widely used in the pha... |
 |
Pinhole Tester / Pinhole Testing Equipment | Seller: Standard International Group (HK) Limited | The pinhole tester for aluminum foil is a device specifically used to detect micro - pinholes in ... |
 |
Cork Puncture and Chip Detection Instrument | Seller: Standard International Group (HK) Limited | The rubber stopper puncture debris detector is a device specifically used to detect the number of... |
 |
Aluminum Ointment Tube Toughness Tester | Seller: Standard International Group (HK) Limited | The ductility tester for aluminum tubes is a device specifically used to detect the ductility ind... |
 |
Vacuum leak tester / Vacuum leak instrument | Seller: Standard International Group (HK) Limited | Vacuum Decay Leak Tester specializes in the detection of leaks in ampoules, vials, injection bott... |
