Shoe bending Angle tester | Sole Bending Tester

• 

Product Introduction:

Shoe bending Angle testing machine is mainly used for outsole rigidity test, with a solid block the front of the shoe clamped on the hard base, with the speed of (100±10)mm/min to increase the force of 30N, observe the Angle of the bending of the outsole, according to its Angle to determine whether the product needs to enter the folding resistance test.

Reference standard:

GB/T 20991-2007 "Test methods for Personal Protective Equipment Shoes" 8.4.1 —— 4

QB/T 1002-2015 Leather Shoes 5.5.4.2

QB/T 2885-2007 "Footwear outsole test methods for folding Performance" 4.2

BS EN ISO 17707-2005

Product Advantages:

Measures Outsole Flexibility/Rigidity: Provides a quantitative assessment of how easily the outsole bends under a specific load.

Standard Compliant: Designed to meet relevant national and international standards for outsole bending stiffness testing.

Preliminary Assessment Tool: Helps determine if an outsole is suitable for more extensive dynamic flexing tests.

Quantitative Result: Provides an objective bending angle measurement at a specified force.

Controlled Test Parameters: Allows for precise control of the speed of force application and the applied load.

Easy to Operate: Relatively straightforward test procedure.

Product Features:

Clamping mechanism designed to securely hold the front part of the shoe or a section of the outsole on a hard base.

Mechanism to apply a controlled force (likely 30N) at a specific speed (100 ± 10 mm/min) to bend the outsole.

System for measuring the bending angle of the outsole when the specified load is applied.

LED digital display to show the measured bending angle.

Robust construction suitable for repetitive testing.

Technical parameters:

1. speed: 100±10/mm/min

2. load: 30kg

3. display: LED digital display

4. Volume: 67X53X65cm

5. Weight: 60kg

6. voltage: AC 220V

Другие товары поставщика

	Falling ball rebound instrument / Ball Rebound Tester	Product Introduction: The falling ball rebound instrument is designed and manufactured according to GB/T6670-2008 or ISO8307 or ASMD3574. It is su...
	PLC liquid crystal touch impact testing machine (simple suspension)	Product Introduction: Liquid crystal touch impact testing machine is mainly used for hard plastics (including sheet, pipe, plastic profile)， reinf...
	EN sole bending tester SATRA TM161	Product Introduction: The EN sole bending tester is used for 90 degree bending test of the sole of rubber, EVA and other zigzag shoes to detect it...
	Qinsun SUNTEST CPS+	A practical desktop xenon lamp equipment with various accessories, customized to meet your SUNTEST needs. Here, you can see SunCool cooling devic...
	Abrasion testing machine / Abrasion Testers	Product Introduction Wear testing machine is used with the balance, specially testing the wear resistance of rubber products such as soles, tires,...

Похожие товары

	Bottle Wall and Bottom Thickness Tester	Продавец: Standard Group (Hong Kong) Limited	The wall and bottom thickness tester for bottles is a measuring instrument widely used in the pha...
	Pinhole Tester / Pinhole Testing Equipment	Продавец: Standard Group (Hong Kong) Limited	The pinhole tester for aluminum foil is a device specifically used to detect micro - pinholes in ...
	Cork Puncture and Chip Detection Instrument	Продавец: Standard Group (Hong Kong) Limited	The rubber stopper puncture debris detector is a device specifically used to detect the number of...
	Aluminum Ointment Tube Toughness Tester	Продавец: Standard Group (Hong Kong) Limited	The ductility tester for aluminum tubes is a device specifically used to detect the ductility ind...
	Vacuum leak tester / Vacuum leak instrument	Продавец: Standard Group (Hong Kong) Limited	Vacuum Decay Leak Tester specializes in the detection of leaks in ampoules, vials, injection bott...