Shoe bending Angle tester | Sole Bending Tester
Product Introduction:
Shoe bending Angle testing machine is mainly used for outsole rigidity test, with a solid block the front of the shoe clamped on the hard base, with the speed of (100±10)mm/min to increase the force of 30N, observe the Angle of the bending of the outsole, according to its Angle to determine whether the product needs to enter the folding resistance test.
Reference standard:
GB/T 20991-2007 "Test methods for Personal Protective Equipment Shoes" 8.4.1 —— 4
QB/T 1002-2015 Leather Shoes 5.5.4.2
QB/T 2885-2007 "Footwear outsole test methods for folding Performance" 4.2
BS EN ISO 17707-2005
Product Advantages:
Measures Outsole Flexibility/Rigidity: Provides a quantitative assessment of how easily the outsole bends under a specific load.
Standard Compliant: Designed to meet relevant national and international standards for outsole bending stiffness testing.
Preliminary Assessment Tool: Helps determine if an outsole is suitable for more extensive dynamic flexing tests.
Quantitative Result: Provides an objective bending angle measurement at a specified force.
Controlled Test Parameters: Allows for precise control of the speed of force application and the applied load.
Easy to Operate: Relatively straightforward test procedure.
Product Features:
Clamping mechanism designed to securely hold the front part of the shoe or a section of the outsole on a hard base.
Mechanism to apply a controlled force (likely 30N) at a specific speed (100 ± 10 mm/min) to bend the outsole.
System for measuring the bending angle of the outsole when the specified load is applied.
LED digital display to show the measured bending angle.
Robust construction suitable for repetitive testing.
Technical parameters:
1. speed: 100±10/mm/min
2. load: 30kg
3. display: LED digital display
4. Volume: 67X53X65cm
5. Weight: 60kg
6. voltage: AC 220V
Send product request
Other supplier products
 |
Print rub tester / Ink Rub Tester | Product Introduction: Print friction testing machine is suitable for print, ink, photosensitive layer of PS plate, gloss oil and related products ... |
 |
Suture Needle Sharpness Intensity Tester YY/T 0043 | The Sharpness and Strength Tester for Suture Needles is a device specifically designed to detect the sharpness and strength of medical suture needl... |
 |
Aluminum Ointment Tube Toughness Tester 丨aluminium collapsable internal coating continuity tester | The ductility tester for aluminum tubes is a device specifically used to detect the ductility indicators of packaging materials such as aluminum so... |
 |
SUGA S80 Carbon Arc Weathering Tester | Applicable Standards The SUGA S80 adheres to globally recognized standards, including: ISO, AATCC, ASTM(e.g., ASTM G152. ASTM D822 for coatings... |
 |
Elastic Tape Fatigue Testing Machine / Elastic Fatigue Testing Machine | Product Introduction: This instrument is used to test the elasticity of elastic belt after reciprocating movement. Standards: SATRA TM103 Appli... |
Same products
 |
Bottle Wall and Bottom Thickness Tester | Seller: Standard International Group (HK) Limited | The wall and bottom thickness tester for bottles is a measuring instrument widely used in the pha... |
 |
Pinhole Tester / Pinhole Testing Equipment | Seller: Standard International Group (HK) Limited | The pinhole tester for aluminum foil is a device specifically used to detect micro - pinholes in ... |
 |
Cork Puncture and Chip Detection Instrument | Seller: Standard International Group (HK) Limited | The rubber stopper puncture debris detector is a device specifically used to detect the number of... |
 |
Aluminum Ointment Tube Toughness Tester | Seller: Standard International Group (HK) Limited | The ductility tester for aluminum tubes is a device specifically used to detect the ductility ind... |
 |
Vacuum leak tester / Vacuum leak instrument | Seller: Standard International Group (HK) Limited | Vacuum Decay Leak Tester specializes in the detection of leaks in ampoules, vials, injection bott... |
