Catheter Vacuum Leak Tester

• 

Standards

GB 15812.1 - 2005 Non - Vascular Intravascular Catheters - Part 1: General Performance Test Methods

GB 8368 Disposable Infusion SetsYY 0489 - 2004. etc.

Main Uses

The catheter vacuum leak tester is a professional device used to detect leaks in medical catheter systems under vacuum conditions. It is mainly used to ensure the sealing and safety of catheters during use and prevent medical accidents caused by leaks.

This tester can be widely applied to the leak detection of various medical catheters, such as suction catheters, drainage catheters, anesthesia catheters, endotracheal tubes, etc.

Technical Parameters

Measuring Range: Usually 0 to - 90kPa, which can meet the negative - pressure testing requirements of various catheters.

Accuracy: Generally reaching level 0.1 to ensure the accuracy of test results.

Vacuum Maintenance Performance: Equipped with an automatic pressure - holding function to ensure the stability of the vacuum during the test.

Test Time: The setting range can be from 1 to 99999 seconds, with an error not exceeding ±1 second.

Power Supply: Usually 220VAC 50Hz or 120VAC 60Hz to adapt to the voltage requirements of different regions.

Net Weight: Depending on the model, the net weight is approximately 20kg.

Другие товары поставщика

	Low-Load Wear Testing Machine	Get a quote： Whats/App: +86 181 0160 0864 Web: gellowen.co.uk The Low-Load Wear Testing Machine is specifically designed to measure wear behavio...
	Leather edge oil fatigue testing machine / Leather Fatigue Test Machine	Product Introduction: Leather edge oil is made of polyvinyl chloride and other resins, used to coat leather, recycled leather, artificial/a colore...
	Thermal Radiation Flame Spread Tester	Get a quote： Whats/App: +86 181 0160 0864 Web: gellowen.co.uk The Thermal Radiation Flame Spread Tester is designed to evaluate the combustion c...
	Textile water evaporation rate tester	Getaquote: Whats/App: +86 181 0160 0864 The Textile Water Evaporation Rate Tester is a precision instrument designed to evaluate the moisture eva...
	Taber Abrasion Tester (Double-Head)	Standards DIN Standards: DIN 53754 (plastics), DIN 53109 (paper/board), DIN 52347 (glass/plastics) ASTM Standards: ASTM D1044 (transparent plas...

Похожие товары

	Bottle Wall and Bottom Thickness Tester	Продавец: Standard Group (Hong Kong) Limited	The wall and bottom thickness tester for bottles is a measuring instrument widely used in the pha...
	Pinhole Tester / Pinhole Testing Equipment	Продавец: Standard Group (Hong Kong) Limited	The pinhole tester for aluminum foil is a device specifically used to detect micro - pinholes in ...
	Cork Puncture and Chip Detection Instrument	Продавец: Standard Group (Hong Kong) Limited	The rubber stopper puncture debris detector is a device specifically used to detect the number of...
	Aluminum Ointment Tube Toughness Tester	Продавец: Standard Group (Hong Kong) Limited	The ductility tester for aluminum tubes is a device specifically used to detect the ductility ind...
	Vacuum leak tester / Vacuum leak instrument	Продавец: Standard Group (Hong Kong) Limited	Vacuum Decay Leak Tester specializes in the detection of leaks in ampoules, vials, injection bott...