.

Catheter Vacuum Leak Tester

Standards

GB 15812.1 - 2005 Non - Vascular Intravascular Catheters - Part 1: General Performance Test Methods

GB 8368 Disposable Infusion SetsYY 0489 - 2004. etc.

Main Uses

The catheter vacuum leak tester is a professional device used to detect leaks in medical catheter systems under vacuum conditions. It is mainly used to ensure the sealing and safety of catheters during use and prevent medical accidents caused by leaks.

This tester can be widely applied to the leak detection of various medical catheters, such as suction catheters, drainage catheters, anesthesia catheters, endotracheal tubes, etc.

Technical Parameters

Measuring Range: Usually 0 to - 90kPa, which can meet the negative - pressure testing requirements of various catheters.

Accuracy: Generally reaching level 0.1 to ensure the accuracy of test results.

Vacuum Maintenance Performance: Equipped with an automatic pressure - holding function to ensure the stability of the vacuum during the test.

Test Time: The setting range can be from 1 to 99999 seconds, with an error not exceeding ±1 second.

Power Supply: Usually 220VAC 50Hz or 120VAC 60Hz to adapt to the voltage requirements of different regions.

Net Weight: Depending on the model, the net weight is approximately 20kg.


在线联系供应商

至: Standard Group (Hong Kong) Limited
Your E-mail:
消息正文:


Send to other suppliers

Other supplier products

Medical Suture Line Diameter Tester YY 1116
Medical Suture Line Diameter Tester YY 1116 The Medical Suture Thread Diameter Tester is a specialized testing equipment used for measuring the diameter or linear diameter of medical suture t...
Dry heat shrinkage tester / Heat Shrinkage Testing Equipment
Dry heat shrinkage tester / Heat Shrinkage Testing Equipment Meet the standard GB/T9101-5.4-2017.GB/T9102-6.8-2016.GB/T19390-7.4.1-2023.ASTM D4974-2002. etc Scope of application It is used to test the dry ...
Ross Flex Tester / Ross Flexing Apparatus / Flex Tester
Ross Flex Tester / Ross Flexing Apparatus / Flex Tester Product Introduction: The ROSS zigzag resistance tester installed the sole strip test piece on the ROSS zigzag test machine, so that the cut is di...
Catheter Airflow Resistance Tester
Catheter Airflow Resistance Tester Compliance Standards YY0461 - 2003. etc. Main Uses The catheter airflow resistance tester is an important tool for evaluating the resistance of gas...
Automatic thermal deformation Vica softening point tester
Automatic thermal deformation Vica softening point tester Product Introduction: 1. Name: Thermal deformation, Vica softening point temperature tester 2. Model :STD-G-1 3. Product introduction: thermal d...
供应产品

Same products

Bottle Wall and Bottom Thickness Tester
Bottle Wall and Bottom Thickness Tester 卖方: Standard Group (Hong Kong) Limited The wall and bottom thickness tester for bottles is a measuring instrument widely used in the pha...
Pinhole Tester / Pinhole Testing Equipment
Pinhole Tester / Pinhole Testing Equipment 卖方: Standard Group (Hong Kong) Limited The pinhole tester for aluminum foil is a device specifically used to detect micro - pinholes in ...
Cork Puncture and Chip Detection Instrument
Cork Puncture and Chip Detection Instrument 卖方: Standard Group (Hong Kong) Limited The rubber stopper puncture debris detector is a device specifically used to detect the number of...
Aluminum Ointment Tube Toughness Tester
Aluminum Ointment Tube Toughness Tester 卖方: Standard Group (Hong Kong) Limited The ductility tester for aluminum tubes is a device specifically used to detect the ductility ind...
Vacuum leak tester / Vacuum leak instrument
Vacuum leak tester / Vacuum leak instrument 卖方: Standard Group (Hong Kong) Limited Vacuum Decay Leak Tester specializes in the detection of leaks in ampoules, vials, injection bott...