Double Wings Package Drop Impact Tester Drop Testing Machine BF F 415D

Applications

Drop Impact Test machineis to test large and heavy package products’ drop impact performance

throughsimulate real face ,edge and corner drop conditions. This equipment mainly used toinspect package products drop resistance capability during transportation ,load and unload works, thus help improve the package design.

Testing Principle

Specimen automatically lifting to pre-setting height, then free drop and shock on the drop plate.

Standard Compliance

ISO 2248 ,

GB/T4857.5-92

Features

1 This machine available for package face, corner, edge free drop testing.

2 With height digital display instrument and tracing height with encoder, so can measure the precision drop height.

3 The drop height tolerance within2% or 10mm;

4 This machine with single wing double column structure, with electronic return, electric control dropping and electronic lifting & dropping devices, easy for operation.

5 Particular impact attenuation device largely increased the machine service life, stability and safety.

6 Drop angle impact surface and bottom plane angle less than 5º;

7 Bottom base with enough weight and thrust surfacearea, ensure 70kg loading from 1.5 meters height, machinewith no tilt, no shake when testing, thus makes the specimen with free dropping.

Technical Parameters

Testing Procedure

1 Fix the specimen on the drop arm, lift to the certain drop height, only±2% difference allowed between the height and setting value. Drop height refers to the distance between the lowest point when release the specimen and the shock impact plate.

2. Release the specimen according to below predetermined state:

A.Face dropping, the angle between the specimen drop face and flat plane should within 2º;

B.Edge dropping, the angle between the edge and the flat plane within 2º,the angle between upper face of specimen and shock plate within±5ºor 10% of angle(Whichever is the larger value),ensure the specimen gravity line through the dropping edge.

C.Corner dropping, the angle tolerance between the specimen upper face and shock impact plate less than or 10% of the angle(Whichever is the larger value),ensure the specimen gravity line through the dropping corner..,

D. No matter what kind shape or status of the specimen, all have to ensure the gravity line of the specimen through the dropping face, edge and corner.

3 The difference between the actual shock speed and the speed when free dropping should within±1% .

4 After testing, check the package and inner products damage condition according to related standard or regulations. And analyze the testing result.

Notice

1 Suggest to put this machine on first floor because of the large volume, and weight about 750kg, normal elevator can not enter in, un-easy for moving.

2 Pay attention to safety when do dropping test, do not close to the shock plate when specimen dropping, avoid injuries caused by specimen dropping or arm return, and influence of the testing results.

3 This machine need regular maintenance to longer the machine service life

Другие товары поставщика

	UL1642 Battery Squeeze Machine Nail penetration Testing BE 6047	Application To test battery safety performance by crushing & nail-penetration through real-time test data ( battery voltage, max. battery tempe...
	2 or 3-Zone Constant Temperature Thermal Shock Chamber Testing Machine	Applications This equipment is widely applied for electronic and electric products, components and materials by constant high low temperature, temp...
	IEC62133 & UN38.3 Battery Crush / Squeeze Test Equipment	Applications Test battery safety performance through crush, after test the sample shall not explode or catch fire.This equipment becomes necessary...
	Lithium Battery Forced Short Circuit Temperature Control Testing Equipment	Introduction Battery large current short-circuit machine is designed to comply with standard; According to the short-circuit test requirement,the s...
	Tensile Test Machine 5KNS	Application This equipment is designed and manufactured tomeasure & test tensile strength, compression strength, peeling strength, tearing...

Все товары поставщика

Похожие товары

	BS EN 12600 Two Tyres Impactor	Продавец: Qinhuangdao Yuanchen Technology Equipment Co., Ltd.	Reference Standard: BS EN 12600:2002Glass in building – Pendulum test – Impact test m...
	Hast Pct High-Low Temperature Test Chamber with Pressure	Продавец: AI SI LI (Китай) Test Equipment Co., Ltd.	HAST PCT High-low Temperature Test Chamber With Pressureis widely applied to the testing of seali...
	Programmable Hast Accelerated Aging Tester for Industry	Продавец: AI SI LI (Китай) Test Equipment Co., Ltd.	HAST (Highly Accelerated Stress Test) is a type of test that is used to evaluate the reliability ...
	CE Certificated Lab Equipment Transport Vibration Tester for Un38.3 Standard	Продавец: AI SI LI (Китай) Test Equipment Co., Ltd.	CE Certificated Lab Equipment Transport Vibration Tester for UN38.3 Standardis applied to test th...
	Package Large Scale Simulation Transportation Vibration Tester	Продавец: AI SI LI (Китай) Test Equipment Co., Ltd.	This machine is used to simulation testing damage between transport for various package stuff, PC...