.

Tensile Test Machine 5KNS

Application

This equipment is designed and manufactured tomeasure & test tensile

strength, compression strength, peeling strength, tearing strength, shearing strengthwith accurate measuring &testing performance forsemi-finished products, finished productsinmetal, plastic, rubber, textile, synthetic chemical, wire & cable, leather industriesetc.

STANDARD COMPLIANCE

GB/T16491-1996 Electronic Universal Testing Machine

GB/T12160-2002 Calibration of Extensometers Used In Uniaxial Testing

GB/T16825-1997 Verification of Tensile Testing Machines

ASTM D903 Adhesives Peel Strength Testing

GB/T2790 Adhesive, 180° Peel Strength Test Method Specimen Assembly

GB/T2791 Adhesives, T peel strength test method for a flexible-to-flexible test specimen assembly

GB/T2792 Test method for peel strength of pressure-sensitive tape at 180° angle

CNS11888 Method of Test for Pressure Sensitive Adhesive Tapes and Sheets

JIS-K6854 Adhesives -- Determination of peel strength of bonded assemblies

PSTC7 Holding Power of Pressure-Sensitive Tapes Available from PSTC (Pressure Sensitive TapeCouncil)

Specifications

1.Factory direct sale
2.Can be customized
3.Good after-sale service
4.Computer type

Technical Parameters

Model

BF-BL-5KNS

Max. Testing Force

500kg /5000N

Unit

Kgf, N,LB

Operating Method

Button Input & Digital Display (Computer with Software System as optional)

Test Resolution

1/10000

Test Accuracy

≤±0.5%

Test Velocity

0-300mm/min (Controllable)

Velocity Accuracy

±1% (of reading value)

Test Spacing

600mm( without Testing Fixture)

Test Width Approx.

120mm

Loading Sensor

0.5 Grade High Precise Force Sensor

Accuracy Class

1 Grade

Test Range

0.4% ~100% Full Scale

Displacement Display Accuracy

±1% (of Reading Value)

Displacement Resolution

0.005mm

Motor Power

0.37KW

Power Input

220V, 50Hz,Single Phase (Special Power Input can be customized)

Overall Dimension (L×W×H)

Approx. 640×450×1200mm

Gross Weight Approx.

90kg



Отправить запрос, связаться с поставщиком

Кому: Bell Test Equipment Co., Ltd, город Дунгуань,
Ваш E-mail:
Текст письма:


Send to other suppliers

Другие товары поставщика

Tensile Test Machine 5KNS
Tensile Test Machine 5KNS Application This equipment is designed and manufactured tomeasure & test tensile strength, compression strength, peeling strength, tearing...
Lithium Battery Forced Short Circuit Temperature Control Testing Equipment
Lithium Battery Forced Short Circuit Temperature Control Testing Equipment Introduction Battery large current short-circuit machine is designed to comply with standard; According to the short-circuit test requirement,the s...
DGBell Environmental Low / high Temperature & Damp Heat Test Chambers
DGBell Environmental Low / high Temperature & Damp Heat Test Chambers Application . Standard Compliance : GB/T10586-2006 Specifications for damp heat chambers,GB/T10592-1989 Specification for low/high temperature test...
High Low Temperature/ Alititude Test Chamber BTHQ series--Standard Vacuum Chamber
High Low Temperature/ Alititude Test Chamber BTHQ series--Standard Vacuum Chamber Applications This equipment is widely applied for aviation, communication ,electronic etc. industries, instruments and meters ,electric products, m...
UL1642 Battery Squeeze Machine Nail penetration Testing BE 6047
UL1642 Battery Squeeze Machine Nail penetration Testing BE 6047 Application To test battery safety performance by crushing & nail-penetration through real-time test data ( battery voltage, max. battery tempe...
Все товары поставщика

Похожие товары

WF-EDU-02 Motor & Propeller Test Kit
WF-EDU-02 Motor & Propeller Test Kit Продавец: Wing Flying Technologies Co., Ltd WF-EDU-02 Motor & Propeller Test Kit Product Description Motor & Propeller Test Kitsare...
WF-EDU-01 Motor and Propeller Test Kit
WF-EDU-01 Motor and Propeller Test Kit Продавец: Wing Flying Technologies Co., Ltd WF-EDU-01 Motor and Propeller Test Kit Product Description Suggested Propulsion system ...
WF-EN-50 Engine Test Bench
WF-EN-50 Engine Test Bench Продавец: Wing Flying Technologies Co., Ltd Suggested Engine 110cc-350cc Engine Max Hanging Type Engine 20kg ...
WF-EN-15 Engine Test Bench
WF-EN-15 Engine Test Bench Продавец: Wing Flying Technologies Co., Ltd WF-EN-15 Engine Test Bench Product Description Suggested Engine 110cc Engine ...
BS EN 12600 Two Tyres Impactor
BS EN 12600 Two Tyres Impactor Продавец: Qinhuangdao Yuanchen Technology Equipment Co., Ltd. Reference Standard: BS EN 12600:2002Glass in building – Pendulum test – Impact test m...