Tensile Test Machine 5KNS
Application
This equipment is designed and manufactured tomeasure & test tensile
strength, compression strength, peeling strength, tearing strength, shearing strengthwith accurate measuring &testing performance forsemi-finished products, finished productsinmetal, plastic, rubber, textile, synthetic chemical, wire & cable, leather industriesetc.
STANDARD COMPLIANCE
GB/T16491-1996 Electronic Universal Testing Machine
GB/T12160-2002 Calibration of Extensometers Used In Uniaxial Testing
GB/T16825-1997 Verification of Tensile Testing Machines
ASTM D903 Adhesives Peel Strength Testing
GB/T2790 Adhesive, 180° Peel Strength Test Method Specimen Assembly
GB/T2791 Adhesives, T peel strength test method for a flexible-to-flexible test specimen assembly
GB/T2792 Test method for peel strength of pressure-sensitive tape at 180° angle
CNS11888 Method of Test for Pressure Sensitive Adhesive Tapes and Sheets
JIS-K6854 Adhesives -- Determination of peel strength of bonded assemblies
PSTC7 Holding Power of Pressure-Sensitive Tapes Available from PSTC (Pressure Sensitive TapeCouncil)
Specifications
1.Factory direct sale
2.Can be customized
3.Good after-sale service
4.Computer type
Technical Parameters
|
Model |
BF-BL-5KNS |
|
Max. Testing Force |
500kg /5000N |
|
Unit |
Kgf, N,LB |
|
Operating Method |
Button Input & Digital Display (Computer with Software System as optional) |
|
Test Resolution |
1/10000 |
|
Test Accuracy |
≤±0.5% |
|
Test Velocity |
0-300mm/min (Controllable) |
|
Velocity Accuracy |
±1% (of reading value) |
|
Test Spacing |
600mm( without Testing Fixture) |
|
Test Width Approx. |
120mm |
|
Loading Sensor |
0.5 Grade High Precise Force Sensor |
|
Accuracy Class |
1 Grade |
|
Test Range |
0.4% ~100% Full Scale |
|
Displacement Display Accuracy |
±1% (of Reading Value) |
|
Displacement Resolution |
0.005mm |
|
Motor Power |
0.37KW |
|
Power Input |
220V, 50Hz,Single Phase (Special Power Input can be customized) |
|
Overall Dimension (L×W×H) |
Approx. 640×450×1200mm |
|
Gross Weight Approx. |
90kg |
在线联系供应商
Other supplier products
 |
2 or 3-Zone Constant Temperature Thermal Shock Chamber Testing Machine | Applications This equipment is widely applied for electronic and electric products, components and materials by constant high low temperature, temp... |
 |
Double Wings Package Drop Impact Tester Drop Testing Machine BF F 415D | Applications Drop Impact Test machineis to test large and heavy package products’ drop impact performance throughsimulate real face ,edge and... |
 |
IEC62133 & UN38.3 Battery Crush / Squeeze Test Equipment | Applications Test battery safety performance through crush, after test the sample shall not explode or catch fire.This equipment becomes necessary... |
 |
High Low Temperature/ Alititude Test Chamber BTHQ series--Standard Vacuum Chamber | Applications This equipment is widely applied for aviation, communication ,electronic etc. industries, instruments and meters ,electric products, m... |
 |
DGBell Environmental Low / high Temperature & Damp Heat Test Chambers | Application . Standard Compliance : GB/T10586-2006 Specifications for damp heat chambers,GB/T10592-1989 Specification for low/high temperature test... |
Same products
 |
WF-EDU-02 Motor & Propeller Test Kit | 卖方: Wing Flying Technologies Co., Ltd | WF-EDU-02 Motor & Propeller Test Kit Product Description Motor & Propeller Test Kitsare... |
 |
WF-EDU-01 Motor and Propeller Test Kit | 卖方: Wing Flying Technologies Co., Ltd | WF-EDU-01 Motor and Propeller Test Kit Product Description Suggested Propulsion system ... |
 |
WF-EN-50 Engine Test Bench | 卖方: Wing Flying Technologies Co., Ltd | Suggested Engine 110cc-350cc Engine Max Hanging Type Engine 20kg ... |
 |
WF-EN-15 Engine Test Bench | 卖方: Wing Flying Technologies Co., Ltd | WF-EN-15 Engine Test Bench Product Description Suggested Engine 110cc Engine ... |
 |
BS EN 12600 双轮胎冲击体 | 卖方: 秦皇岛源辰科技设备有限公司 | 参考标准: BS EN 12600:2002建筑用玻璃。摆锤试验。平板玻璃的冲击试验方法和分类 技术数据: 1)充气轮胎冲击器: 重量:50kg±0.1 kg 胎压:0.35Mp... |
