The near-infrared spectroscopy analyzer for textile fiber components /

• 

Overview:

The near-infrared spectroscopy analyzer for textile fiber components is suitable for qualitative and quantitative detection of textiles. The equipment features non-destructive testing, high speed, resource conservation, environmental friendliness, and the ability to perform both qualitative and quantitative analyses.

Non-destructive: It uses near-infrared light to directly irradiate the sample in transmission or diffuse reflection mode. Near-infrared light has a certain penetration ability and is non-destructive to the sample.

High speed: It can achieve millisecond-level scanning of a single spectrum at the fastest, and in combination with near-infrared spectroscopy analysis models, it can realize qualitative identification and simultaneous analysis of multiple components.

Resource conservation: Without consumables, it realizes "zero-cost" detection. Meanwhile, it can analyze multiple component indicators simultaneously, significantly saving detection costs and reducing detection labor intensity.

Environmental friendly: It directly obtains near-infrared spectra representing the intrinsic quality of the sample without pre-treatment, avoiding the use of toxic, harmful, and highly corrosive chemical reagents and eliminating "secondary pollution".

Qualitative and quantitative analysis: Relying on chemometrically established qualitative and quantitative near-infrared spectroscopy analysis models for predictive analysis, it can simultaneously predict and analyze multiple property component indicators.

Technical Parameters:

Wavelength range: 1000 nm - 2500 nm

Resolution: Adjustable from 1 nm, 2 nm, 4 nm, 8 nm to 16 nm

Wavelength accuracy: ≤ 0.5 nm

Wavelength repeatability: ≤ 0.04 nm

Stray light: < 0.1%

Signal-to-noise ratio: 3000:1

Analysis time: 22 seconds

Detection indicators: Qualitative and quantitative analyses are completed simultaneously.

Spectroscopic principle: Acousto-optic tunable filter (AOTF). The spectrometer has no mechanical vibration components, ensuring the stability and reliability of the instrument's spectrum. It adopts a bottom-illumination optical path design with non-contact sample design. Automatic calibration is available without manual calibration.

Detector: InGaAs high-sensitivity indium gallium arsenide detector. Noise level < 5E - 5

Light source: A 5V, 5W light source design with a lifespan of > 10.000 hours. The light source is easy to replace without professional training.

Working mode: Bottom-illumination optical path design with non-contact sample design. Diffuse reflection detection mode.

Sample cup: Rotatable sample cup design, compatible with both powdered and whole samples.

Operation and software system: The instrument is built-in with a computer. It runs on the WIN7 operating system, with 4G memory and a 64G solid-state drive. It comes with a USB interface and a wireless network card, enabling all networking functions, data transmission and storage, self-diagnosis of the instrument's status, remote control, etc.

Data modeling and analysis software: The built-in computer includes market-standard chemometric modeling and analysis software. The modeling and data processing software are integrated, making operation simple. The software is upgraded for free for life. The software can fully control the hardware part, perform self-diagnosis, and promptly prompt fault status.

Instrument working environment requirements: Temperature range: 5°C - 35°C; Humidity range: 5% - 85%

Product dimensions: 280 * 220 * 210 mm (L * W * H)

Product weight: 6 kg

Другие товары поставщика

	Taber oscillation and wear instrument ASTM F735 ARCA AR-C STP 5.2.5	Standards ASTM F735. ARCA AR-C STP 5.2.5 (Bayer Wear Test) Applications Taber oscillation and wear instrumentis used to test the transparency of...
	GMA Ultra-filtration Membrane Porometers	Standards: ASTM F316-2003, ASTM D6767-2002, ASTM E1294-1999, ISO 4003-1990, GB/T 14041.1-2007, HY/T 051-1999, HY/T 064-2002 Applications: ...
	Comprehensive oil filter tester	Standards: 1、Executive standard: jb/t 5088.2-2008 internal combustion engine spin-on oil filter; 2、Test object: internal combustion engine oil fi...
	Paint film scratch tester	Product Introduction: It is suitable for printing, labeling, mobile shell, MP3/MP4 shell, laptop computer shell and other kinds of household appl...
	G645 leather shoe hook stiffness testing machine	Leather shoe hook stiffness tester is suitable for measuring the longitudinal bending stiffness of leather shoe hook. The principle is to fix the h...

Похожие товары

	FH-77 Dissolved hydrogen meter	Продавец: Коллирон электроникс лимитед	Pen type dissolved hydrogen detector / dissolved hydrogen meter: used to measure the dissolved hy...
	Xenon Arc Weather Ometer	Продавец: Standard Group (Hong Kong) Limited	Get a quote： Whats/App: +86 181 0160 0864 SI4000Xenon Arc Weather Ometer utilizes a xenon lamp ...
	Xenotest | Light Fastness Tester Si220 (SunTest)	Продавец: Standard Group (Hong Kong) Limited	Get a quote： Whats/App:+86 180 0160 0864 A Light Fastness Tester, or Xenon Tester, Accelerated ...
	Ozone Aging Chamber	Продавец: Standard Group (Hong Kong) Limited	Get a quote： Whats/App:+86 156 1874 6768 The Ozone Aging Chamber is a precision testing instrum...
	Plastic Smoke Density Tester F313	Продавец: Standard International Group (HK) Limited	Whats/App: +86 156 1874 6768 Web: standard-groups.com The F313 Plastic Smoke Density Tester is ...