The near-infrared spectroscopy analyzer for textile fiber components
Overview:
The near-infrared spectroscopy analyzer for textile fiber components is suitable for qualitative and quantitative detection of textiles. The equipment features non-destructive testing, high speed, resource conservation, environmental friendliness, and the ability to perform both qualitative and quantitative analyses.
Non-destructive: It uses near-infrared light to directly irradiate the sample in transmission or diffuse reflection mode. Near-infrared light has a certain penetration ability and is non-destructive to the sample.
High speed: It can achieve millisecond-level scanning of a single spectrum at the fastest, and in combination with near-infrared spectroscopy analysis models, it can realize qualitative identification and simultaneous analysis of multiple components.
Resource conservation: Without consumables, it realizes "zero-cost" detection. Meanwhile, it can analyze multiple component indicators simultaneously, significantly saving detection costs and reducing detection labor intensity.
Environmental friendly: It directly obtains near-infrared spectra representing the intrinsic quality of the sample without pre-treatment, avoiding the use of toxic, harmful, and highly corrosive chemical reagents and eliminating "secondary pollution".
Qualitative and quantitative analysis: Relying on chemometrically established qualitative and quantitative near-infrared spectroscopy analysis models for predictive analysis, it can simultaneously predict and analyze multiple property component indicators.
Technical Parameters:
Wavelength range: 1000 nm - 2500 nm
Resolution: Adjustable from 1 nm, 2 nm, 4 nm, 8 nm to 16 nm
Wavelength accuracy: ≤ 0.5 nm
Wavelength repeatability: ≤ 0.04 nm
Stray light: < 0.1%
Signal-to-noise ratio: 3000:1
Analysis time: 22 seconds
Detection indicators: Qualitative and quantitative analyses are completed simultaneously.
Spectroscopic principle: Acousto-optic tunable filter (AOTF). The spectrometer has no mechanical vibration components, ensuring the stability and reliability of the instrument's spectrum. It adopts a bottom-illumination optical path design with non-contact sample design. Automatic calibration is available without manual calibration.
Detector: InGaAs high-sensitivity indium gallium arsenide detector. Noise level < 5E - 5
Light source: A 5V, 5W light source design with a lifespan of > 10.000 hours. The light source is easy to replace without professional training.
Working mode: Bottom-illumination optical path design with non-contact sample design. Diffuse reflection detection mode.
Sample cup: Rotatable sample cup design, compatible with both powdered and whole samples.
Operation and software system: The instrument is built-in with a computer. It runs on the WIN7 operating system, with 4G memory and a 64G solid-state drive. It comes with a USB interface and a wireless network card, enabling all networking functions, data transmission and storage, self-diagnosis of the instrument's status, remote control, etc.
Data modeling and analysis software: The built-in computer includes market-standard chemometric modeling and analysis software. The modeling and data processing software are integrated, making operation simple. The software is upgraded for free for life. The software can fully control the hardware part, perform self-diagnosis, and promptly prompt fault status.
Instrument working environment requirements: Temperature range: 5°C - 35°C; Humidity range: 5% - 85%
Product dimensions: 280 * 220 * 210 mm (L * W * H)
Product weight: 6 kg
Send product request
Other supplier products
 |
Motorized Notching Machine | Product Introduction: Plastic electric notch prototype is a cantilever beam, simply supported beam impact testing machine to do the impact toughne... |
 |
Acid Penetration Tester | Acid Penetration Tester - Textile and Apparel - standard Standards: GB 24540-2009《protective clothing against liquid acids and alkalis 》Appendi... |
 |
Fully Automatic Closed Mouth Flash Point Tester | Meet the standard: ASTM D93 ISO 2719 IP 34 ASTM D7236 Product Introduction: The flash point is a critical parameter for classifying flammab... |
 |
Femoral Stem Neck Prostheses Fatigue Testing Machine | Standard YY/T 0809.6 (China): Specifies neck fatigue testing for femoral stems in partial/total hip arthroplasty. ISO 7206-6 (International): D... |
 |
Large-size Brushing Machine | lt is applicable to the industries such ashome textiles, carpet and rugs etc. Main technical parameters Power voltage:AC380V50Hz±10% Fan ... |
Same products
 |
FH-77 Dissolved hydrogen meter | Seller: Kelilong Electron Co.,Ltd | Pen type dissolved hydrogen detector / dissolved hydrogen meter: used to measure the dissolved hy... |
 |
Xenon Arc Weather Ometer | Seller: Standard International Group (HK) Limited | Get a quote： Whats/App: +86 181 0160 0864 SI4000Xenon Arc Weather Ometer utilizes a xenon lamp ... |
 |
Xenotest | Light Fastness Tester Si220 (SunTest) | Seller: Standard International Group (HK) Limited | Get a quote： Whats/App:+86 180 0160 0864 A Light Fastness Tester, or Xenon Tester, Accelerated ... |
 |
Ozone Aging Chamber | Seller: Standard International Group (HK) Limited | Get a quote： Whats/App:+86 156 1874 6768 The Ozone Aging Chamber is a precision testing instrum... |
 |
Plastic Smoke Density Tester F313 | Seller: Standard International Group (HK) Limited | Whats/App: +86 156 1874 6768 Web: standard-groups.com The F313 Plastic Smoke Density Tester is ... |
