Intelligent fiber heat shrinkable tester FZ / T-T50004-1991

• 

Standards:

GB / T6505-1986; FZ / T-T50004-1991

Applications:

used to measure a variety of chemical fibers and natural fibers in the dry heat, high temperature steam, boiling water treatment after the heat shrinkage

Product Information:

Intelligent fiber heat shrinkable testerused to measure a variety of chemical fibers and natural fibers in the dry heat, high temperature steam, boiling water treatment after the heat shrinkage

Instrument features:

The instrument uses automatic control and data processing technology.Applicable to 0.89 ~ 16.65dtex fiber heat shrinkage measurement.The entire test process automatically, automatically screening test results in the outlier data, a maximum of two test tubes can be tested, each sample can hold up to 30 samples.The number of barrels and the number of samples per cylinder can be set freely.The instrument automatically determines the cylinder number, so that the baking and baking before the corresponding data, but also to break the rupture after the judge.The instrument automatically counts and automatically performs data processing.Can be displayed, the computer print output shrinkage rate of single value and the average, extreme, CV value and effective test number and other statistical data.The instrument has high resolution, stable performance, high degree of automation, simple operation.

1. Thermal shrinkage measurement range: 0 ~ 25%;

2. Measurement accuracy: ± 0.01mm;

3. Thermal shrinkage measurement error: ≤ ± 0.1%;

4. Upper and lower gripper spacing: 20mm ± 1mm;

5. Cylindrical frame can test the number of roots: 35;

6. Pre-tension folder quality error: ≤ 10%

Power supply:AC220V 50Hz 500W

Другие товары поставщика

	Large-size Brushing Machine	lt is applicable to the industries such ashome textiles, carpet and rugs etc. Main technical parameters Power voltage:AC380V50Hz±10% Fan ...
	Large diameter blasting test machine/ Large Diameter Pipeline Burst Tester / High Pressure Pipe Burst Testing Equipment	Standard ASTM D1599: Compliant for short-time hydraulic failure testing of thermoplastic pipes under linear pressure ramp. ISO 1167: Configurab...
	Environmental stress cracking testing machine/ ESCR Test Machine / Polymer Stress Cracking Resistance Tester	Standard ASTM D1693: Exclusively designed for bending beam and constant load tests on polyethylene and other thermoplastics. ISO 22088-3: Confi...
	Powder Wet Vibrating Screen System For Lithium Battery Material Testing	Standard ASTM E11: Standard Specification for Woven Wire Test Sieve Cloth and Test Sieves ISO 3310-1: Test Sieves – Technical Requirements ...
	Spinal Internal Fixation System Component Testing Machine	Standard YY/T 0119-2014 (China): Specifies mechanical testing protocols for spinal fixation components, including screws, plates, rods, and conn...

Похожие товары

	Plastic Smoke Density Tester F313	Продавец: Standard International Group (HK) Limited	The F313 Plastic Smoke Density Tester is a precision instrument designed to measure the specific ...
	Xenon Test Chamber	Продавец: Standard International Group (HK) Limited	Features and Benefits 1.The use of xenon arc lamp as a light source, can simulate the full sunli...
	Single Cable Vertical Flame Tester	Продавец: Qinsun Instruments Co., LTD	Introduction Single Cable Vertical Flame Tester is used for the vertical flame propagation of a ...
	Safety Helmet Flammability Tester	Продавец: Qinsun Instruments Co., LTD	Product Introduction: Safety hat flame retardant performance tester for safety hat flame retarda...
	Furniture flammability tester	Продавец: Qinsun Instruments Co., LTD	Product details Furniture flammability tester is mainly used to test the combustion performance ...