Intelligent fiber heat shrinkable tester FZ / T-T50004-1991
Standards:
GB / T6505-1986; FZ / T-T50004-1991
Applications:
used to measure a variety of chemical fibers and natural fibers in the dry heat, high temperature steam, boiling water treatment after the heat shrinkage
Product Information:
Intelligent fiber heat shrinkable testerused to measure a variety of chemical fibers and natural fibers in the dry heat, high temperature steam, boiling water treatment after the heat shrinkage
Instrument features:
The instrument uses automatic control and data processing technology.Applicable to 0.89 ~ 16.65dtex fiber heat shrinkage measurement.The entire test process automatically, automatically screening test results in the outlier data, a maximum of two test tubes can be tested, each sample can hold up to 30 samples.The number of barrels and the number of samples per cylinder can be set freely.The instrument automatically determines the cylinder number, so that the baking and baking before the corresponding data, but also to break the rupture after the judge.The instrument automatically counts and automatically performs data processing.Can be displayed, the computer print output shrinkage rate of single value and the average, extreme, CV value and effective test number and other statistical data.The instrument has high resolution, stable performance, high degree of automation, simple operation.
1. Thermal shrinkage measurement range: 0 ~ 25%;
2. Measurement accuracy: ± 0.01mm;
3. Thermal shrinkage measurement error: ≤ ± 0.1%;
4. Upper and lower gripper spacing: 20mm ± 1mm;
5. Cylindrical frame can test the number of roots: 35;
6. Pre-tension folder quality error: ≤ 10%
Power supply:AC220V 50Hz 500W
Send product request
Other supplier products
 |
Mask Leakage Tester | Applications: The Mask Integrity Test Accessory (MITA) works in tandem with the CBRN Mask Protection Assessment Test System or PortaCount? Respi... |
 |
Filter Flow Resistance Tester | Meet the standard: ISO 3968 SAE J806 Product Introduction: The Filter Flow Resistance Tester operates by circulating a test fluid (such as hy... |
 |
water vapor permeability tester | This instrument is professionally applicable to the determination of water vapor transmission rate of plastic films, composite films, high barrier ... |
 |
Creep testing machine with full incision | Standard ISO 16770: Exclusively designed for full-notch creep testing (FNCT) of thermoplastics under sustained stress. ASTM D2990: Configurable f... |
 |
Electrode tortuosity tester & diaphragm ion conductivity tester | Standard Electrode Tortuosity Analyzer: ASTM E1970-21 (Electrochemical Impedance Spectroscopy) ISO 18516 (Conductive Coatings – Resistivit... |
Same products
 |
Plastic Smoke Density Tester F313 | Seller: Standard International Group (HK) Limited | The F313 Plastic Smoke Density Tester is a precision instrument designed to measure the specific ... |
 |
Xenon Test Chamber | Seller: Standard International Group (HK) Limited | Features and Benefits 1.The use of xenon arc lamp as a light source, can simulate the full sunli... |
 |
Single Cable Vertical Flame Tester | Seller: Qinsun Instruments Co., LTD | Introduction Single Cable Vertical Flame Tester is used for the vertical flame propagation of a ... |
 |
Safety Helmet Flammability Tester | Seller: Qinsun Instruments Co., LTD | Product Introduction: Safety hat flame retardant performance tester for safety hat flame retarda... |
 |
Furniture flammability tester | Seller: Qinsun Instruments Co., LTD | Product details Furniture flammability tester is mainly used to test the combustion performance ... |
