Infusion Apparatus Leakage Positive Pressure Tester

• 

M102 Infusion apparatus leakage positive pressure tester, It is suitable for the measurement of the airtight of injector for medical purpose, and it can accurately measure whether the sealing performance of the injection syringe meets the specified requirements.

Standards compliant：

GB 8368-2005: Chinese National Standard "Disposable Infusion Sets for Single Use — Gravity Infusion Type", which mandates performance requirements (including airtightness) for medical infusion devices, directly guiding the tester’s validation of syringe/seal integrity.

Major Features

Touch-tone control panel

The tester adopts touch-tone and LED digital display meter, and the test pressure can be set arbitrarily, with wide application range, stable performance, and long service life.

Test time can be set arbitrarily

The tester has a timing module, and the test time can be set arbitrarily to meet different test requirements.

Air Leaknge Teater far Seoitive Pressre

Flexible and compact design The flexible and compact design makes this tester easy to assemble, which can be installed to test from the lab to the production line at anytime, anywhere.

Field Application

M102 Infusion apparatus leakage positive pressure tester, Itis suitable for the measurement of positive pressure airtight of medical infusion apparatus, blood transfusion devices, infusion needles, anesthesia bag filters, pipelines, conduits, quick joints, and etc. It can accurately measure whether the sealing performance of injection syringe meets the specified requirements.

It is applicable to the performance verification of new products, quality control of the production department, and the of material properties for the third-party testing organization, the product performance verification laboratory, and the quality and technical supervisiondepartment, etc.

Technical Parameters

Usage:

put the instrument horizontally on the test platform ;

the Vessel to be tested will be installed on the outfall Connector;

Plug the power plug into the distribution board, and the power socket on the distribution board must be grounded reliably.

Operating instructions

Другие товары поставщика

	G678W-L Shoe Cold Resistance Tester	Product Introduction: Shoes cold resistance testing machine is used to test finished shoes, rubber, sole, synthetic leather, plastic and other tes...
	Medical injection needle rigidity tester	Standard GB 18457-2001 This standard mandates precise control over needle wall thickness (normal, thin, ultra-thin) and rigidity performance, dir...
	Thermal Insulation Rock Wool Thermal Load Tester	Introduction： This equipment determines the temperature at which rock wool insulation shrinks under a specified load when heated at a controlled r...
	Adiabatic Accelerated Calorimeter	Product Description Adiabatic Accelerated Calorimeter determines the thermal behavior of samples under adiabatic conditions by keeping the tempe...
	Non-woven fabric friction coefficient analyzer	Instrument Description This fabric friction tester can measure the static and kinetic friction coefficients of non - woven fabrics. It can be used...

Похожие товары

	FH-77 Dissolved hydrogen meter	Продавец: Коллирон электроникс лимитед	Pen type dissolved hydrogen detector / dissolved hydrogen meter: used to measure the dissolved hy...
	Xenon Arc Weather Ometer	Продавец: Standard Group (Hong Kong) Limited	Get a quote： Whats/App: +86 181 0160 0864 SI4000Xenon Arc Weather Ometer utilizes a xenon lamp ...
	Xenotest | Light Fastness Tester Si220 (SunTest)	Продавец: Standard Group (Hong Kong) Limited	Get a quote： Whats/App:+86 180 0160 0864 A Light Fastness Tester, or Xenon Tester, Accelerated ...
	Ozone Aging Chamber	Продавец: Standard Group (Hong Kong) Limited	Get a quote： Whats/App:+86 156 1874 6768 The Ozone Aging Chamber is a precision testing instrum...
	Plastic Smoke Density Tester F313	Продавец: Standard International Group (HK) Limited	Whats/App: +86 156 1874 6768 Web: standard-groups.com The F313 Plastic Smoke Density Tester is ...