Infusion Apparatus Leakage Positive Pressure Tester
M102 Infusion apparatus leakage positive pressure tester, It is suitable for the measurement of the airtight of injector for medical purpose, and it can accurately measure whether the sealing performance of the injection syringe meets the specified requirements.
Standards compliant：
GB 8368-2005: Chinese National Standard "Disposable Infusion Sets for Single Use — Gravity Infusion Type", which mandates performance requirements (including airtightness) for medical infusion devices, directly guiding the tester’s validation of syringe/seal integrity.
Major Features
Touch-tone control panel
The tester adopts touch-tone and LED digital display meter, and the test pressure can be set arbitrarily, with wide application range, stable performance, and long service life.
Test time can be set arbitrarily
The tester has a timing module, and the test time can be set arbitrarily to meet different test requirements.
Air Leaknge Teater far Seoitive Pressre
Flexible and compact design The flexible and compact design makes this tester easy to assemble, which can be installed to test from the lab to the production line at anytime, anywhere.
Field Application
M102 Infusion apparatus leakage positive pressure tester, Itis suitable for the measurement of positive pressure airtight of medical infusion apparatus, blood transfusion devices, infusion needles, anesthesia bag filters, pipelines, conduits, quick joints, and etc. It can accurately measure whether the sealing performance of injection syringe meets the specified requirements.
It is applicable to the performance verification of new products, quality control of the production department, and the of material properties for the third-party testing organization, the product performance verification laboratory, and the quality and technical supervisiondepartment, etc.
Technical Parameters
|
Control mode: automatic |
Weight30kg |
|
Test pressure :- 10KPa~ -30KPa |
Power supply:220V 50Hz |
|
Pressure accuracy: ±0.5KPa |
Appearance size: 40cmX45cmX45cm |
|
Test time:1-16S/adjustable |
Usage:
put the instrument horizontally on the test platform ;
the Vessel to be tested will be installed on the outfall Connector;
Plug the power plug into the distribution board, and the power socket on the distribution board must be grounded reliably.
Operating instructions
在线联系供应商
Other supplier products
 |
Impact strength tester for car seat headrest | Applicable standards: GB 15083-2006 "Automobile seats, seat fixtures and headrest strength requirements and test methods" : This standard specifie... |
 |
Protective garment resistance evaluation device | Related Standards GB/T 22042 - 2008 Clothing - Anti-static Performance - Test Method for Surface Resistivity GB/T 22043 - 2008 Clothing - Anti-stat... |
 |
Automatic freezing point pour point cold tester | Product Introduction: The automatic freezing point pouring point Freezing point tester is suitable for petroleum, biological, chemical and other f... |
 |
Surgical Mask Flame Retardant Tester | Standards: GB 19083-2010 Technical Requirements for Medical Protective Masks, 5.5 Performances of Synthetic Blood Penetration and Barrier YY 0469... |
 |
" Helmet Surface Friction Testing Machine" | Purpose The Helmet Surface Friction Tester presses a helmet onto a movable fixture with a certain force. The surface of the fixture is attached wi... |
Same products
 |
FH-77富氢测试笔 | 卖方: 科立龙电子股份有限公司 | 产品说明： 用于测量氢气水（富氢水）和氢气水发生器的溶解氢含量。 特征： 1、电极更换方便 智能、携带方便、操作方便、实用； 产品广泛应用于食品、环卫、地质勘探、冶金、地表水、 ... |
 |
Xenon Arc Weather Ometer | 卖方: Standard Group (Hong Kong) Limited | Get a quote： Whats/App: +86 181 0160 0864 SI4000Xenon Arc Weather Ometer utilizes a xenon lamp ... |
 |
Xenotest | Light Fastness Tester Si220 (SunTest) | 卖方: Standard Group (Hong Kong) Limited | Get a quote： Whats/App:+86 180 0160 0864 A Light Fastness Tester, or Xenon Tester, Accelerated ... |
 |
Ozone Aging Chamber | 卖方: Standard Group (Hong Kong) Limited | Get a quote： Whats/App:+86 156 1874 6768 The Ozone Aging Chamber is a precision testing instrum... |
 |
Plastic Smoke Density Tester F313 | 卖方: Standard International Group (HK) Limited | Whats/App: +86 156 1874 6768 Web: standard-groups.com The F313 Plastic Smoke Density Tester is ... |
