Metal Corrosivity Tester
standards
GB/T 15970
ISO 7539
ASTM G31
GB/T 10125
Scope of Application
The metal corrosivity tester is designed and manufactured in line with the requirements stipulated in the national standard of the People's Republic of China, GB/T21621 Test Method for Metal Corrosivity of Dangerous Goods. It is applicable to the metal corrosivity testing of liquid substances or solid substances that may become liquid during transportation.
Main Parameters
1. Working power supply: AC220V ± 10%; 50Hz 2. Quantity of samples: Eight holes 3. Total power consumption of the whole machine: No more than 1500W 4. Temperature - control range: Room temperature ~ 100°C 5. Temperature - control accuracy: ±0.5°C 6. Condensation system: Equipped with a compressor - refrigerated circulating water tank 7. Ambient temperature: -10°C ~ 40°C 8. Relative humidity: ≤85%
Technical parameters
|
Operating environment |
(5~40)°C, <85%RH |
|
Temperature control range |
Room temperature ~ 80°C |
|
Temperature control accuracy |
±1°C |
|
Temperature uniformity |
±0.5°C |
|
Timing range |
(0~30)days |
|
Timing display resolution |
1min |
|
Sample container volume |
3000mL, effective volume 2000mL |
Отправить запрос, связаться с поставщиком
Другие товары поставщика
 |
Tensile and Shear Tester STD - FB1 - A | The Tensile and Shear Tester analyzes hand movements-referred to as "tensile"and "shear"-performed by artisans and professionals when judging a fab... |
 |
Face Mask Tensile Tester | Introduction: The test machine uses the integrated structure of the motor and the speed control system to drive the synchronous belt deceleration ... |
 |
American European bending tester | Test Purpose： To determine if metal wires in children's products bend or break under stress, creating sharp edges or points that pose choking or i... |
 |
Photovoltaic module outdoor exposure test system | Standard IEC 61215: Terrestrial Photovoltaic (PV) Modules – Design Qualification and Type Approval IEC 61730: Photovoltaic (PV) Module Sa... |
 |
Safety Helmet Roll-off Testing Equipment | The safety helmet retention test equipment is a device used to evaluate the stability of a helmet's fit when subjected to impact. By simulating the... |
Похожие товары
 |
Plastic Smoke Density Tester F313 | Продавец: Standard International Group (HK) Limited | The F313 Plastic Smoke Density Tester is a precision instrument designed to measure the specific ... |
 |
Xenon Test Chamber | Продавец: Standard International Group (HK) Limited | Features and Benefits 1.The use of xenon arc lamp as a light source, can simulate the full sunli... |
 |
Single Cable Vertical Flame Tester | Продавец: Qinsun Instruments Co., LTD | Introduction Single Cable Vertical Flame Tester is used for the vertical flame propagation of a ... |
 |
Safety Helmet Flammability Tester | Продавец: Qinsun Instruments Co., LTD | Product Introduction: Safety hat flame retardant performance tester for safety hat flame retarda... |
 |
Furniture flammability tester | Продавец: Qinsun Instruments Co., LTD | Product details Furniture flammability tester is mainly used to test the combustion performance ... |
