Catheter Residual Vacuum Tester
Main Uses
The catheter residual vacuum tester is mainly used to determine the physical properties of residual vacuum and leakage in suction catheters for the respiratory tract and other similar medical devices. It is one of the important means to evaluate the performance of medical devices such as suction catheters for the respiratory tract, ensuring the safety and effectiveness of these devices during use. By testing the residual vacuum of catheters, the effectiveness of the vacuum control device at the machine end in releasing vacuum can be verified, thus ensuring that respiratory catheters can meet specific performance requirements during use. In addition, this tester can also be used for detecting vacuum leakage in catheter systems of medical devices such as hemodialysis machines, intravenous infusion devices, and ventilators, to promptly identify and resolve leakage issues and avoid medical accidents caused by leakage.
Compliance Standards
YY/T 0339 - 2019 Suction Catheters for the Respiratory Tract, etc.
Technical Parameters
Flowmeter:
Measurement Range: Usually, it can measure 30L/min or more. Accuracy: ±5% or higher. Airflow Resistance at a Specific Flow Rate (e.g., 30L/min): It should be less than 0.1kPa.
Manometer:
Measurement Range: Usually covers ±1kPa or a larger range. Accuracy: Usually within ±0.01kPa (0.1cmH2O). Vacuum Pump: It is used to create a vacuum environment inside the catheter, and its performance should be stable and reliable.
Control Device: It is used to control the operation of the tester and the setting of test parameters, and should have an intuitive and easy - to - use operation interface.
Отправить запрос, связаться с поставщиком
Другие товары поставщика
 |
AATCC KMS-M6 Washer, KMS-M6D Dryer | I. Product Overview TheAATCC KMS-M6 Washer & KMS-M6D Dryerare precision textile testing instruments designed to evaluate fabric durability, co... |
 |
Safety Helmet Lateral Rigidity Tester | Standard GB 2812: Safety Helmets (China National Standard) Equivalent Compliance: ISO 6220-2 (Industrial Safety Helmets – Lateral Deformati... |
 |
Strength Tester for Lead - end of Photovoltaic Modules | Standard IEC 61215-2:2016: Terrestrial Photovoltaic (PV) Modules – Test Requirements for Electrical and Mechanical Components CE Certificat... |
 |
Bubble Pressure Method Membrane Pore Size Analyzer | Test function ◆ Bubble Point Pressure ◆ Wet Membrane Flow-Pressure Curve (Wet Curve) ◆ Bubble Point Pore Size (Maximum Pore Size) ◆ Dry Membran... |
 |
Thermal - Cold Cycle Testing Machine | Standard BS 7291: Compliant for thermal cycling tests on thermoplastic pipe systems (1769 Series with pressure chamber). Adaptive Certification... |
Похожие товары
 |
Plastic Smoke Density Tester F313 | Продавец: Standard International Group (HK) Limited | The F313 Plastic Smoke Density Tester is a precision instrument designed to measure the specific ... |
 |
Xenon Test Chamber | Продавец: Standard International Group (HK) Limited | Features and Benefits 1.The use of xenon arc lamp as a light source, can simulate the full sunli... |
 |
Single Cable Vertical Flame Tester | Продавец: Qinsun Instruments Co., LTD | Introduction Single Cable Vertical Flame Tester is used for the vertical flame propagation of a ... |
 |
Safety Helmet Flammability Tester | Продавец: Qinsun Instruments Co., LTD | Product Introduction: Safety hat flame retardant performance tester for safety hat flame retarda... |
 |
Furniture flammability tester | Продавец: Qinsun Instruments Co., LTD | Product details Furniture flammability tester is mainly used to test the combustion performance ... |
