Catheter Residual Vacuum Tester
Main Uses
The catheter residual vacuum tester is mainly used to determine the physical properties of residual vacuum and leakage in suction catheters for the respiratory tract and other similar medical devices. It is one of the important means to evaluate the performance of medical devices such as suction catheters for the respiratory tract, ensuring the safety and effectiveness of these devices during use. By testing the residual vacuum of catheters, the effectiveness of the vacuum control device at the machine end in releasing vacuum can be verified, thus ensuring that respiratory catheters can meet specific performance requirements during use. In addition, this tester can also be used for detecting vacuum leakage in catheter systems of medical devices such as hemodialysis machines, intravenous infusion devices, and ventilators, to promptly identify and resolve leakage issues and avoid medical accidents caused by leakage.
Compliance Standards
YY/T 0339 - 2019 Suction Catheters for the Respiratory Tract, etc.
Technical Parameters
Flowmeter:
Measurement Range: Usually, it can measure 30L/min or more. Accuracy: ±5% or higher. Airflow Resistance at a Specific Flow Rate (e.g., 30L/min): It should be less than 0.1kPa.
Manometer:
Measurement Range: Usually covers ±1kPa or a larger range. Accuracy: Usually within ±0.01kPa (0.1cmH2O). Vacuum Pump: It is used to create a vacuum environment inside the catheter, and its performance should be stable and reliable.
Control Device: It is used to control the operation of the tester and the setting of test parameters, and should have an intuitive and easy - to - use operation interface.
Send product request
Other supplier products
 |
Respirator Fit meter | PortaCount Respirator Fit Tester: Qinsun assesses the overall integrity of masks by performing an aerosol leak test utilizing the PortaCount Respi... |
 |
Electric Wire and Cable Smoke Density Tester | Product details Electric wire and cable smoke density tester complies withGB/T17651.1~2-1998.IEC61034-1~2:1997“Measurement of smoke density ... |
 |
Sock Stretch Tester | Standards compliant:FZ / T 70006, FZ / T 73001, FZ / T 73011, FZ / T 73013, FZ / T 73029, FZ / T 73030The main parameters:1. Tensile speed: 20mm / ... |
 |
Hydrogen Sulfide Corrosion Resistance Test Chamber | Referenced Standards: Complies with national standard GB/T 978.9-88 "Corrosion Test of Metal and Non-Metal Coatings Under Condensing Sulfur Dioxid... |
 |
Socks wear meter | Product Introduction: Socks wear tester is a special equipment, mainly used to test the wear resistance of socks material. It evaluates the comfor... |
Same products
 |
FH-77 Dissolved hydrogen meter | Seller: Kelilong Electron Co.,Ltd | Pen type dissolved hydrogen detector / dissolved hydrogen meter: used to measure the dissolved hy... |
 |
Xenon Arc Weather Ometer | Seller: Standard International Group (HK) Limited | Get a quote： Whats/App: +86 181 0160 0864 SI4000Xenon Arc Weather Ometer utilizes a xenon lamp ... |
 |
Xenotest | Light Fastness Tester Si220 (SunTest) | Seller: Standard International Group (HK) Limited | Get a quote： Whats/App:+86 180 0160 0864 A Light Fastness Tester, or Xenon Tester, Accelerated ... |
 |
Ozone Aging Chamber | Seller: Standard International Group (HK) Limited | Get a quote： Whats/App:+86 156 1874 6768 The Ozone Aging Chamber is a precision testing instrum... |
 |
Plastic Smoke Density Tester F313 | Seller: Standard International Group (HK) Limited | Whats/App: +86 156 1874 6768 Web: standard-groups.com The F313 Plastic Smoke Density Tester is ... |
