Catheter Residual Vacuum Tester
Main Uses
The catheter residual vacuum tester is mainly used to determine the physical properties of residual vacuum and leakage in suction catheters for the respiratory tract and other similar medical devices. It is one of the important means to evaluate the performance of medical devices such as suction catheters for the respiratory tract, ensuring the safety and effectiveness of these devices during use. By testing the residual vacuum of catheters, the effectiveness of the vacuum control device at the machine end in releasing vacuum can be verified, thus ensuring that respiratory catheters can meet specific performance requirements during use. In addition, this tester can also be used for detecting vacuum leakage in catheter systems of medical devices such as hemodialysis machines, intravenous infusion devices, and ventilators, to promptly identify and resolve leakage issues and avoid medical accidents caused by leakage.
Compliance Standards
YY/T 0339 - 2019 Suction Catheters for the Respiratory Tract, etc.
Technical Parameters
Flowmeter:
Measurement Range: Usually, it can measure 30L/min or more. Accuracy: ±5% or higher. Airflow Resistance at a Specific Flow Rate (e.g., 30L/min): It should be less than 0.1kPa.
Manometer:
Measurement Range: Usually covers ±1kPa or a larger range. Accuracy: Usually within ±0.01kPa (0.1cmH2O). Vacuum Pump: It is used to create a vacuum environment inside the catheter, and its performance should be stable and reliable.
Control Device: It is used to control the operation of the tester and the setting of test parameters, and should have an intuitive and easy - to - use operation interface.
在线联系供应商
Other supplier products
 |
Цифровой автоматический тестер прочности на взрыв | Standards: ASTM D3786, ERT 80-4-20, GB/T 7742.1, BS EN ISO 13938-1, BS 3424-6-B, ISO 3303-B, ISO 2758, ISO 3303.2, ISO 3689, JIS L1018/L1093, IWS ... |
 |
Micro Controll High-temperature Friction Tester | Applicable Standards When conducting tests, the microcomputer - controlled high - temperature friction testing machine usually needs to comply wit... |
 |
Resistance Tester for Molten Metal Droplet (Splash) Impact tester | Performance and Standards: This resistance tester for molten metal droplet (splash) impact performance is developed in accordance with testing sta... |
 |
Syringe needle flow tester | Product introduction It is a device used to detect the flow of syringes. The principle is to calculate the flow of syringes by measuring the amou... |
 |
Microscale Continuously Closed Cup Flash Point Analyzer | Reference Standards： SH/T 0768, SN/T 3077.1, DL/T 1354, ASTM D6450 SN/T 3077.2, ASTM D7094 GB/T 261, GB/T 21615, ASTM D93 GB/T 5208, GB/T 21790, A... |
Same products
 |
FH-77富氢测试笔 | 卖方: 科立龙电子股份有限公司 | 产品说明： 用于测量氢气水（富氢水）和氢气水发生器的溶解氢含量。 特征： 1、电极更换方便 智能、携带方便、操作方便、实用； 产品广泛应用于食品、环卫、地质勘探、冶金、地表水、 ... |
 |
Xenon Arc Weather Ometer | 卖方: Standard Group (Hong Kong) Limited | Get a quote： Whats/App: +86 181 0160 0864 SI4000Xenon Arc Weather Ometer utilizes a xenon lamp ... |
 |
Xenotest | Light Fastness Tester Si220 (SunTest) | 卖方: Standard Group (Hong Kong) Limited | Get a quote： Whats/App:+86 180 0160 0864 A Light Fastness Tester, or Xenon Tester, Accelerated ... |
 |
Ozone Aging Chamber | 卖方: Standard Group (Hong Kong) Limited | Get a quote： Whats/App:+86 156 1874 6768 The Ozone Aging Chamber is a precision testing instrum... |
 |
Plastic Smoke Density Tester F313 | 卖方: Standard International Group (HK) Limited | Whats/App: +86 156 1874 6768 Web: standard-groups.com The F313 Plastic Smoke Density Tester is ... |
