Bone Plates Four-point Bending Fatigue Tester

• 

Standard

YY/T 1503-2016: Chinese standard specifying test methods for bending fatigue properties of metallic bone plates, requiring 1 million cycles or failure at 5Hz frequency and R=0.1.

ASTM F382: International standard for metallic bone plates, covering material specifications, mechanical testing (including fatigue), and quality assurance protocols.

Product Advantages

Precision Load Control:

Electromagnetic servo-controlled loading system ensures sinusoidal force application with ±0.5% accuracy, adhering to YY/T 1503’s 5Hz frequency requirement.

Adjustable R-ratio (0.1–0.9) and load range (10 Nm–1.000 Nm) for versatile testing scenarios.

Customized Fixturing:

Modular four-point bending clamps with interchangeable roller diameters (6–13mm) and contour-matching designs accommodate diverse bone plate geometries.

Anti-slip mechanisms prevent specimen displacement during high-cycle testing.

Advanced Testing Protocols:

Preloaded SOPs for fatigue life (N cycles to failure) and fatigue strength (S-N curve generation) per ASTM F382.

Optional axial-torsional coupling for simulating combined loading in complex fracture scenarios.

Data Integrity:

Real-time monitoring of cycles, torque, and angular displacement with 5000Hz sampling rate.

Automatic report generation (PDF/Excel) with statistical analysis of median fatigue strength at 10⁶ cycles.

Durability & Safety:

Corrosion-resistant steel frame and overload protection system ensure longevity and operator safety.

Low-noise operation (<65 dB) for lab-friendly use.

Product Features

Load Capacity: 10 Nm–1.000 Nm (torsional) / 5 kN (axial).

Frequency Range: 0.01–100 Hz (adjustable for static/dynamic tests).

Temperature Control: Optional environmental chamber (-20°C to +150°C) for simulating physiological conditions.

Software Suite:

Intuitive interface with multi-language support (English/Chinese/Spanish).

Customizable test profiles and compliance with 21 CFR Part 11 for audit trails.

Calibration: NIST-traceable certification included, with annual recalibration service available.

Technical Parameters

Другие товары поставщика

	Guide pin anchoring force tester	Product introduction The anchoring force test of the guide needle can ensure the anchoring effect of the mammary positioning filament within the t...
	Textile Fiber Composition tester	Standard ASTM D276(Standard Test Method for Identification of Fibers in Textiles) ISO 1833(Determination of Fiber Content in Textiles) AATCC 2...
	Standard Helmet Visual Field Tester	Standards EN 1078:2023: Helmets for Pedal Cyclists, Skateboarders, and Roller Skaters CE Certification(Conformité Européenne) Equi...
	In-situ expansion analysis device	Standard ASTM E83: Standard Test Method for Verification of Linear Displacement Measuring Systems ISO 12417-1: Mechanical Testing of Metals &ndas...
	Helmets Designated Protection Areas Tester	Main Purposes 1. Used to mark test points and test lines on helmets. 2. Used for line - marking according to different test standards. 3. Used t...

Похожие товары

	Plastic Smoke Density Tester F313	Продавец: Standard International Group (HK) Limited	The F313 Plastic Smoke Density Tester is a precision instrument designed to measure the specific ...
	Xenon Test Chamber	Продавец: Standard International Group (HK) Limited	Features and Benefits 1.The use of xenon arc lamp as a light source, can simulate the full sunli...
	Single Cable Vertical Flame Tester	Продавец: Qinsun Instruments Co., LTD	Introduction Single Cable Vertical Flame Tester is used for the vertical flame propagation of a ...
	Safety Helmet Flammability Tester	Продавец: Qinsun Instruments Co., LTD	Product Introduction: Safety hat flame retardant performance tester for safety hat flame retarda...
	Furniture flammability tester	Продавец: Qinsun Instruments Co., LTD	Product details Furniture flammability tester is mainly used to test the combustion performance ...