Chromium carbide powder for metallurgical wear-resistant parts
This chromium carbide powder is black in color, with a particle size of 5-25μm, a purity of over 99%, and extremely low impurity content. The particles have good dispersibility and are easy to mix with the metal matrix. After powder metallurgy sintering, highly wear-resistant parts can be produced. It is applicable to precision bearings, micro gears and other precision instrument components, which can reduce wear and improve the operational accuracy and stability of equipment. Chromium carbide powder has outstanding high-temperature oxidation resistance. Its oxidation rate is low below 900℃ in the air, and the formed oxide film can prevent further oxidation, making it suitable for use in high-temperature working conditions. When applied to the coating of gas turbine blades, it enables the blades to operate normally at high temperatures of 600-800℃ and extends the maintenance cycle. The sintering activity of the powder is high. After sintering with the metal binder phase at 1100-1300℃, high-density cemented carbide can be made, with a flexural strength of over 1500MPa. In the field of high-temperature bearings, this alloy bearing can withstand high temperatures and high loads, and its performance is superior to that of traditional bearing steel.
Отправить запрос, связаться с поставщиком
Другие товары поставщика
 |
High-density titanium carbide rods | Hard alloy titanium carbide round rods can be tailored into products with varying properties by adjusting the titanium carbide content (typically r... |
 |
Titanium carbide hard rods - for mechanical seals | The production process of this round bar is extremely strict, from the purity control of titanium carbide powder (purity ≥99.5%) to the precise ... |
 |
Stable and jitter-free titanium carbide guide wheel | Carbide titanium carbide guide wheel has a wide range of working temperature, -100 ℃ to 600 ℃ environment with stable performance, in the low-tem... |
 |
Large-scale production of chromium carbide powder for cost reduction | Chromium carbide powder is often irregular grayish-black particles with a particle size of 10-40μm, a purity of ≥98%, and a free carbon conte... |
 |
Titanium carbide hard alloy rods are highly hard and wear-resistant | 与传统高速钢棒材相比，硬质合金碳化钛圆棒的切削速度可提高3至5倍，可显著缩短批量生产中的加工时间。其微观组织均匀，晶粒尺寸可控制在1μm以下，确保棒材各部位性能一致，避免因材质不均导致的刀具失效。在模具行业，用其制成的冷冲压模具镶块，其使用寿命是钢制镶块的50至100倍，可显著降低更换频... |
Похожие товары
 |
3D printing spherical titanium carbide powder | Продавец: Zhuzhou Hastion High-Tech Materials Co.,Ltd. | This batch of titanium carbide powder (TiC) has a purity of over 99.5%, with a particle size cont... |
 |
Titanium carbide hard alloy drive wheel - Specialized | Продавец: Zhuzhou Hastion High-Tech Materials Co.,Ltd. | The titanium carbide (TiC) guide wheel is fabricated via high-temperature powder metallurgy sinte... |
 |
Industrial guide wheels, titanium carbide wear-resistant alloy | Продавец: Zhuzhou Hastion High-Tech Materials Co.,Ltd. | This carbonized titanium (TiC) guide wheel is formed by high-temperature sintering of 99.5% pure ... |
 |
Unfinished bar stock - heat treatable | Продавец: Zhuzhou Hastion High-Tech Materials Co.,Ltd. | This high-purity titanium carbonitride (TiCN) round bar is fabricated via hot-pressing and sinter... |
 |
Steel-based titanium carbide hard alloy round bar | Продавец: Zhuzhou Hastion High-Tech Materials Co.,Ltd. | This carbonitride round bar (TiC) is formed by hot-pressing and sintering 99.5% high-purity carbo... |
