Chromium carbide powder for metallurgical wear-resistant parts
This chromium carbide powder is black in color, with a particle size of 5-25μm, a purity of over 99%, and extremely low impurity content. The particles have good dispersibility and are easy to mix with the metal matrix. After powder metallurgy sintering, highly wear-resistant parts can be produced. It is applicable to precision bearings, micro gears and other precision instrument components, which can reduce wear and improve the operational accuracy and stability of equipment. Chromium carbide powder has outstanding high-temperature oxidation resistance. Its oxidation rate is low below 900℃ in the air, and the formed oxide film can prevent further oxidation, making it suitable for use in high-temperature working conditions. When applied to the coating of gas turbine blades, it enables the blades to operate normally at high temperatures of 600-800℃ and extends the maintenance cycle. The sintering activity of the powder is high. After sintering with the metal binder phase at 1100-1300℃, high-density cemented carbide can be made, with a flexural strength of over 1500MPa. In the field of high-temperature bearings, this alloy bearing can withstand high temperatures and high loads, and its performance is superior to that of traditional bearing steel.
在线联系供应商
Other supplier products
 |
Long-lasting wear-resistant titanium carbide guide wheel | Hard alloy titanium carbide guide wheels are key guiding components in the production of wire and tube materials. They are made by powder metallurg... |
 |
Mirror-finish titanium carbide guide wheels | The installation holes of the guide wheel have high precision, and the fit clearance with the shaft can be controlled within 0.005-0.01mm, ensuring... |
 |
3D printing spherical titanium carbide powder | This batch of titanium carbide powder (TiC) has a purity of over 99.5%, with a particle size controlled within 0.5-5 μm, a density of 6.68 g/cm&... |
 |
High-performance chromium carbide powder | Chromium carbide powder is often irregular grayish-black particles with a particle size of 10-40μm, a purity of ≥98%, and a free carbon conte... |
 |
Titanium carbide hard alloy drive wheel - Specialized | The titanium carbide (TiC) guide wheel is fabricated via high-temperature powder metallurgy sintering using titanium carbide powder with a purity o... |
Same products
|
|
3D printing spherical titanium carbide powder | 卖方: 株洲华斯盛高科材料有限公司 | This batch of titanium carbide powder (TiC) has a purity of over 99.5%, with a particle size cont... |
|
|
Titanium carbide hard alloy drive wheel - Specialized | 卖方: 株洲华斯盛高科材料有限公司 | The titanium carbide (TiC) guide wheel is fabricated via high-temperature powder metallurgy sinte... |
 |
Industrial guide wheels, titanium carbide wear-resistant alloy | 卖方: 株洲华斯盛高科材料有限公司 | This carbonized titanium (TiC) guide wheel is formed by high-temperature sintering of 99.5% pure ... |
 |
Unfinished bar stock - heat treatable | 卖方: 株洲华斯盛高科材料有限公司 | This high-purity titanium carbonitride (TiCN) round bar is fabricated via hot-pressing and sinter... |
 |
Steel-based titanium carbide hard alloy round bar | 卖方: 株洲华斯盛高科材料有限公司 | This carbonitride round bar (TiC) is formed by hot-pressing and sintering 99.5% high-purity carbo... |
