High wear-resistant titanium carbide guide wheel - alloy
The surface of the guide wheel can be specially treated according to specific requirements. For example, applying a diamond coating can enhance its wear resistance by 30%, making it suitable for processing high-hardness alloy wires. It is 30% lighter than steel guide wheels of comparable dimensions, thereby reducing the load on the drive motor and decreasing energy consumption by more than 15%. In precision tube manufacturing, the groove accuracy of the guide wheel achieves IT3 grade, ensuring the outer diameter tolerance of the tube is maintained within ±0.01 mm, meeting the stringent precision demands of industries such as medical technology and aerospace. Compared with ceramic guide wheels, this type exhibits superior toughness and is less prone to fracture from minor impacts, thus reducing replacement frequency. Its service life is 2 to 3 times longer than that of ceramic counterparts. In steel cord production, a single set of these guide wheels can process over 1,000 tons of cord, whereas ceramic guide wheels typically last only 300 to 500 tons. The favorable cost-performance ratio has facilitated widespread adoption in the tire industry, contributing to improved wear resistance and safety of tires.
Отправить запрос, связаться с поставщиком
Другие товары поставщика
 |
Customized channel-shaped titanium carbide guide wheels | The guide wheel features high-precision installation holes, with a fit clearance of 0.005–0.01 mm between the holes and the shaft. This ensur... |
 |
Titanium carbide rods for precision mechanical components | Titanium carbide alloy bar is an alloy bar with titanium carbide as the main component, combining high hardness, wear-resistant properties, good hi... |
 |
Titanium carbide hard alloy guide wheel industry | Hard alloy titanium carbide guide wheels have excellent impact resistance. When the wire is suddenly tensioned or broken, they are not prone to cra... |
 |
Titanium carbide guide wheels that reduce material loss by 10% | The installation holes of the guide wheel have high precision, and the fit clearance with the shaft can be controlled within 0.005-0.01mm, ensuring... |
 |
Special for titanium carbide hard guide wheel transmission | The surface of the guide wheel can be specially treated as required. For instance, after being sprayed with a diamond coating, its wear resistance ... |
