Coating raw material for wear resistance and corrosion resistance
The preparation methods of this powder mainly include the electric arc furnace method and the carbon thermal reduction method. Among them, the powder produced by the carbon thermal reduction method has a finer particle size and lower cost, making it suitable for large-scale applications. The oxygen content of the powder is less than 0.2%, which can reduce the pores and inclusions in the coating and improve the density of the coating. On the surface of the valve stem of an automotive engine, after spraying chromium carbide powder, the wear of the stem can be reduced by 80%, and the major overhaul cycle of the engine can be extended. Chromium carbide powder has good wetting properties and is firmly bonded to metal substrates such as iron, nickel, and cobalt. The coating is less likely to crack.
Отправить запрос, связаться с поставщиком
Другие товары поставщика
 |
Customizable carbide guide wheel & roller | Guide wheels, also known as guide rolls or guide wheels, are an important part of bar and wire rod rolling equipment in the iron and steel indust... |
 |
Chromium carbide powder for automotive brake pads | This chromium carbide powder is black in color, with a particle size of 5-25μm, a purity of over 99%, and extremely low impurity content. The pa... |
 |
Low oxygen and free carbon quality stable titanium carbide powder | Titanium Carbide powder is a grey-black high hardness ultra-fine powder with the chemical formula of TiC, which has both metal and ceramic proper... |
 |
Compressive strength over 3000MPa titanium carbide rods | titanium carbide round bars can be customised with different properties by adjusting the titanium carbide content (usually 70-90%) and binder ratio... |
 |
High-precision titanium carbide hard alloy guide wheels to ensure concentricity | The surface of the guide wheel can be specially treated to meet specific requirements. For example, after being coated with diamond spray, its wear... |
