Coating raw material for wear resistance and corrosion resistance
The preparation methods of this powder mainly include the electric arc furnace method and the carbon thermal reduction method. Among them, the powder produced by the carbon thermal reduction method has a finer particle size and lower cost, making it suitable for large-scale applications. The oxygen content of the powder is less than 0.2%, which can reduce the pores and inclusions in the coating and improve the density of the coating. On the surface of the valve stem of an automotive engine, after spraying chromium carbide powder, the wear of the stem can be reduced by 80%, and the major overhaul cycle of the engine can be extended. Chromium carbide powder has good wetting properties and is firmly bonded to metal substrates such as iron, nickel, and cobalt. The coating is less likely to crack.
在线联系供应商
Other supplier products
 |
Titanium Carbide Powders for Cemented Carbide Preparation | Titanium carbide powder is a kind of grey-black ultra-fine powder, the purity can be up to 99.9% or more, the average particle size between 0.5-5... |
 |
Chromium carbide powder with uniform microstructure | The powder has a high hardness, with a microhardness of up to 2200HV. The hardness of the wear-resistant coating prepared from it can reach over HR... |
 |
High temperature resistant chromium carbide powder | Chromium carbide powder is a grey or black powdery inorganic compound, mainly composed of chromium and carbon elements, the chemical formula is C... |
 |
Impact-resistant and non-deformable titanium carbide guide wheel | The guide wheel features high-precision installation holes, with a fit clearance relative to the shaft controlled within the range of 0.005–0... |
 |
Titanium carbide guide wheel - for industrial use | Hard alloy titanium carbide guide wheels are key guiding components in the production of wire and tube materials. They are made by powder metallurg... |
Same products
 |
3D printing spherical titanium carbide powder | 卖方: 株洲华斯盛高科材料有限公司 | This batch of titanium carbide powder (TiC) has a purity of over 99.5%, with a particle size cont... |
 |
Titanium carbide hard alloy drive wheel - Specialized | 卖方: 株洲华斯盛高科材料有限公司 | The titanium carbide (TiC) guide wheel is fabricated via high-temperature powder metallurgy sinte... |
 |
Industrial guide wheels, titanium carbide wear-resistant alloy | 卖方: 株洲华斯盛高科材料有限公司 | This carbonized titanium (TiC) guide wheel is formed by high-temperature sintering of 99.5% pure ... |
 |
Unfinished bar stock - heat treatable | 卖方: 株洲华斯盛高科材料有限公司 | This high-purity titanium carbonitride (TiCN) round bar is fabricated via hot-pressing and sinter... |
 |
Steel-based titanium carbide hard alloy round bar | 卖方: 株洲华斯盛高科材料有限公司 | This carbonitride round bar (TiC) is formed by hot-pressing and sintering 99.5% high-purity carbo... |
