42CrMo4 Alloy Structural Steel

• 

Description:

42CrMo4 materials have been widely used in automotive driving elements. Although 42CrMo4 is more expensive than 41Cr4, it is more preferable in terms of material properties. In this study, these two materials were heat treated by austenitizing in a continuous furnace at 850°C and quenched in oil at 90°C. After they were tempered at various temperatures, mechanical properties were determined for each tempering temperature. The material properties for both materials were compared with each other. Results indicated that same mechanical properties for 41Cr4 and 42CrMo4 can be achieved by tempering 41Cr4 about 50°C lower temperature than for 42CrMo4. In addition to the mechanical tests, fatigue tests were performed for both materials. Weibull distributions were plotted. Results indicated that 42CrMo4 had a longer life than 41Cr4 material.

Chemical Composition

Mechanical Properties((Hardened and Tempered):

Heat Treatment:

• Forging: Heat to 1150°C Hold until uniform.Minimum forging temperature 850°C. Cool slowly in ashes or sand etc.
• Annealing: Heat to 830°C – 850°C. Cool in furnace.
• Normalising: Heat to 870°C – 900°C. Cool in still air.

Forging

Heat to 1150 °C Hold until uniform. Minimum forging temperature 850°C. Cool slowly in ashes or sand etc.

ANNEALING

Heat to 830°C – 850°C. Cool in furnace.

Normalizing

Heat to 870°C – 900°C. Cool in still air.

Stress Relieving:

• Annealed: Heat to 600°C – 650°C • Hardened: Heat to 500°C – 550°C. Cool in still air • Hardening:Heat to 830°C – 880°C. Quench in oil or polymer. • Tempering:Heat to 450°C – 700°C cool in still air. NB. Tempering within the range 200°C–420°C will result in temper brittleness and should be avoided Flame and Induction Hardening: Heat quickly to the required case depth at 860°C – 890°C and quench immediately in water or oil. Tempering at 150°C – 200°C will reduce stresses in the case with minimal effect on its hardness. All de-carburised surface material must first be removed to ensure best results. • Nitriding: Heat to 500°C – 530°C and hold for sufficient time to develop the depth of case required Parts should be pre-hardened and tempered as required and also premachined leaving a small grinding allowance only.

Другие товары поставщика

	42CrMo4 Alloy Structural Steel	Description: 42CrMo4 materials have been widely used in automotive driving elements. Although 42CrMo4 is more expensive than 41Cr4, it is more pref...
	AISI H13 Alloy Tool Steel	Description: Uniform microstructure, free cutting and good polishing, High tenacity, ductility and high wear resistance in high temperature, Excell...
	S45C Carbon Structural Steel	Description: S45Cis a kind of high carbon steel grade which based on the standard of JIS G 4051- 2009. S45C steel has excellentweldability and mach...
	Круглый бар SAE1035 углеродистой стали	SAE1035Химический анализ -% по массе* Класс С Си Млн П С КЛ Н КР Макс Макс Макс Макс Макс Макс SAE1035 SA...
	S55C Carbon Structural Steel round bar	Description: S55C is a kind of high quality carbon structural steel and S55C is a Japanese steel grade. S55C is similar with Chinese material 55# s...

Похожие товары

	White Iron Wear Blocks, Wear Bars	Продавец: Yiwu WALKSON Machinery Equipment Co., Ltd.	The unique, formable designed wear bars is available in various lengths, grades and sizes and can...
	Stainless steel Travel Mug Wholesale	Продавец: Golmate Enterprise Co., Ltd	Stainless steel travel mug wholesaleis a good companion when traveling, shopping, driving and doi...
	Pot Magnets With Bore	Продавец: Leyuan Group Co., ltd.	These neodymium pot magnets with countersunk holes have only one surface that has strong magnetis...
	1,2312 / P20 сталёвы стрыжань Кошт	Продавец: Дунгуань Горад-Шун цвіль сталі ТАА	specifications: 1, 1.2312/P20 Steel Rod Price 2,MOQISFlexible 3,Samplefreeand24hoursonline 4,Our...
	1.2080 high quality galvanized steel sheet	Продавец: Дунгуань Горад-Шун цвіль сталі ТАА	Product Description 1,Size of D3 cold work steel Roundbar Diameter(m...