Car seat components strength test bench
Applicable standards:
GB 15083：Itspecifies the strength requirements and test methods of the car seat system, which is applicable to the seats and their fixtures of M and N cars.
FMVSS 207：Itspecifies the strength requirements of the seat back and its adjustment device and applies to all seats in Class M1 vehicles.
ECE R17：Itregulates the strength of car seats, seat belt anchors, etc.
Main parameters:
| Parameter | Description |
|---|---|
| Loading capacity | The test bench should have sufficient loading capacity to simulate the various loads that the seat may withstand in actual use. For example, for a 20g static loading test, the test bench needs to be able to apply a force equivalent to 20 times the gravity of the seat assembly. |
| Loading method | The test bench should support a variety of loading methods, such as horizontal forward, horizontal backward, torsion, etc., to meet the needs of different test projects. |
| Test accuracy | The loading accuracy and measurement accuracy of the test bench should meet the requirements of the relevant standards to ensure the accuracy and reliability of the test results. |
| Number of tests | The test bench should have the function of setting and recording the number of tests for durability testing. |
| Control mode | The test bench is usually controlled by computer servo to achieve accurate loading and measurement. |
| Data acquisition and processing | The test bench should be equipped with a data acquisition system, which can automatically record various data during the test process and generate test reports |
Отправить запрос, связаться с поставщиком
Другие товары поставщика
 |
Rail transit car wire abrasion testing machine | Applicable standards: GBIT 12528-2008 Standard for cables for rail transit vehicles with a rated AC voltage of 3KV and below Main parameters:... |
 |
Seat Belt Abrasion Tester-QINSUN | Standard： ISO 10555(Seat Belt Assemblies - Test Methods for Abrasion Resistance) ECE R16(Uniform Provisions Concerning the Approval of Safety B... |
 |
Fabric Fiber Shedding Degree Tester (Friction)-QINSUN | Instrument Testing Principle Lay the specimen flat and fix it on the holder. Make the wet abrasive attached to the friction head perform reciproca... |
 |
Scott Flex Tester-QINSUN | Product Introduction: Scott kneading tester is suitable for back and forth kneading resistance of leather, leather and woven materials. One end o... |
 |
Vapor Shrinkage Tester | I. Product Overview TheVapor Shrinkage Testeris a specialized thermal analysis instrument designed to measure dimensional changes in textiles, pol... |
Похожие товары
 |
Seat Bumping and Creep Test Bench | Продавец: Standard International Group (HK) Limited | This test bench is used for simulating the car seat bumping and creep situation when a car is run... |
 |
Automobile seat belt fixed point test bench | Продавец: Standard International Group (HK) Limited | Applicable standards: National mandatory standards: GB 15083-2006"Automobile seats, seat fixtur... |
 |
Impact strength tester for car seat headrest | Продавец: Standard International Group (HK) Limited | Applicable standards: GB 15083-2006 "Automobile seats, seat fixtures and headrest strength requi... |
 |
Impact strength tester for car seat launching headrest | Продавец: Standard International Group (HK) Limited | Main parameters: Impact speed:The impact speed of the tester is usually between 25 and 30km/h, w... |
 |
Automobile Headrest Strength Tester | Продавец: Standard International Group (HK) Limited | Applicable standards: GB 11550-2009"Automobile seat headrest strength requirements and test me... |
