Car seat components strength test bench
Applicable standards:
GB 15083：Itspecifies the strength requirements and test methods of the car seat system, which is applicable to the seats and their fixtures of M and N cars.
FMVSS 207：Itspecifies the strength requirements of the seat back and its adjustment device and applies to all seats in Class M1 vehicles.
ECE R17：Itregulates the strength of car seats, seat belt anchors, etc.
Main parameters:
| Parameter | Description |
|---|---|
| Loading capacity | The test bench should have sufficient loading capacity to simulate the various loads that the seat may withstand in actual use. For example, for a 20g static loading test, the test bench needs to be able to apply a force equivalent to 20 times the gravity of the seat assembly. |
| Loading method | The test bench should support a variety of loading methods, such as horizontal forward, horizontal backward, torsion, etc., to meet the needs of different test projects. |
| Test accuracy | The loading accuracy and measurement accuracy of the test bench should meet the requirements of the relevant standards to ensure the accuracy and reliability of the test results. |
| Number of tests | The test bench should have the function of setting and recording the number of tests for durability testing. |
| Control mode | The test bench is usually controlled by computer servo to achieve accurate loading and measurement. |
| Data acquisition and processing | The test bench should be equipped with a data acquisition system, which can automatically record various data during the test process and generate test reports |
Send product request
Other supplier products
 |
Water bath indentation hardness tester | Product Introduction: Water bath indentation hardness tester is used to determine the indentation hardness of extruded polyethylene anticorrosive ... |
 |
Air - tightness Testing Device for Automotive Connectors | The air - tightness testing device for automotive connectors uses the pressure principle to conduct non - destructive tightness tests on containe... |
 |
Geosynthetic direct shear drawing friction tester | The friction characteristics of the interface of sand/geotextile were determined by testing the contact surface of standard sand/geotextile. This i... |
 |
Foam Indentation Fatigue Testing Machine-QINSUN | Standard ASTM D3574(Standard Test Methods for Flexible Cellular Materials - Slab, Bonded, and Molded Urethane Foams) ISO 3385(Flexible Cellular... |
 |
Foam cutter | Standards JB/T 11346-2013 EN 12100 UNE-EN 14886:2008 Scope of application This machine is mainly used for cutting foam materials, which can ... |
Same products
 |
Seat Bumping and Creep Test Bench | Seller: Standard International Group (HK) Limited | This test bench is used for simulating the car seat bumping and creep situation when a car is run... |
 |
Automobile seat belt fixed point test bench | Seller: Standard International Group (HK) Limited | Applicable standards: National mandatory standards: GB 15083-2006"Automobile seats, seat fixtur... |
 |
Impact strength tester for car seat headrest | Seller: Standard International Group (HK) Limited | Applicable standards: GB 15083-2006 "Automobile seats, seat fixtures and headrest strength requi... |
 |
Impact strength tester for car seat launching headrest | Seller: Standard International Group (HK) Limited | Main parameters: Impact speed:The impact speed of the tester is usually between 25 and 30km/h, w... |
 |
Automobile Headrest Strength Tester | Seller: Standard International Group (HK) Limited | Applicable standards: GB 11550-2009"Automobile seat headrest strength requirements and test me... |
