Mobile reactor cleaning machine

• 

Introduction

Stainless Steel Industrial Cylinder Automatic Cleaning System (Also Known as Cylinder Auto-Cleaning System)

This system is designed for cleaning three-dimensional mixing tanks, mobile cylinders, transfer cylinders, and circulation cylinders. It utilizes high-pressure water jets controlled by an electric system to operate pumps, valves, and hydraulic mechanisms. The integrated rotating brush design combined with cleaning solution achieves three-dimensional, no-blind-spot coverage through cyclic cleaning. The system operates fully automatically with operator supervision for process monitoring and assistance.

System Configuration

1. Three-dimensional cleaning high-pressure water pump rated 20-500 kg/cm²

2. Copper brush cleaning with solvent spray

3. Inclined discharge structure

4. Blowdown port cleaning device

5. Explosion-proof configuration

6. Automatic lifting mechanism

7. Fixed external frame with safety guardrails

Mobile Cylinder Cleaning Equipment Workflow

1. Transport cylinders to inner cleaning station via forklift and position securely.

2. Cleaning head descends into drum via pneumatic cylinder with pressure detection (anti-damage mechanism), initiating pump station for 360° high-pressure internal cleaning. Fully automated process with no manual intervention.

3. MD high-pressure cleaner used for internal cleaning.

4. 2-4 minute cleaning cycle: Cleaning head stops rotation/spraying and retracts to standby position after completion.

Industrial Cylinder Cleaning Line Workflow

1. Manual loading into loading position with open end facing up (sensor detection).

2. 180° rotation transfer to transition conveyor via flipping mechanism.

3. Conveyor transports to DMF internal cleaning station: Doors close hydraulically, DMF pressurized by pump station forms high-pressure jet through rotating cleaner. Solvent recirculates to waste collection system.

4. Conveyor moves to fresh water cleaning station: Internal/external 360° high-pressure cleaning.

5. Transfer to drying station: Steam-heated airflow achieves 95% moisture removal.

6. Positioning at transition area.

7. Final 180° unloading flip via clamping mechanism.

8. Manual consolidation of cleaned cylinders.

Другие товары поставщика

	4-station Leather Rubbing Color Fastness Tester	Standards ISO 11640(Leather – Color fastness to rubbing) SATRA TM170(Standard method for color fastness to rubbing) AATCC 8(Colorfastnes...
	High - voltage DC Stability Tester	The high - voltage DC stability tester is suitable for testing DC high - voltage within the range of 0.1 - 5.00KV and continuously recording the ...
	Qinsun UV-master	In response to the climate resistance testing requirements for outdoor textiles, this equipment can simulate outdoor climate conditions and accel...
	Paper stiffness tester	Compliance Standards: ISO 5628、ISO 2493 TAPPI T489、TAPPI T556、JIS P 8125 Product Introduction: ZY-TDY300 microcomputer bending stiffness tester...
	Chemical Protective Robotic Manikin Clothing Testing Equipment

Похожие товары

	Seat Bumping and Creep Test Bench	Продавец: Standard International Group (HK) Limited	This test bench is used for simulating the car seat bumping and creep situation when a car is run...
	Automobile seat belt fixed point test bench	Продавец: Standard International Group (HK) Limited	Applicable standards: National mandatory standards: GB 15083-2006"Automobile seats, seat fixtur...
	Impact strength tester for car seat headrest	Продавец: Standard International Group (HK) Limited	Applicable standards: GB 15083-2006 "Automobile seats, seat fixtures and headrest strength requi...
	Impact strength tester for car seat launching headrest	Продавец: Standard International Group (HK) Limited	Main parameters: Impact speed:The impact speed of the tester is usually between 25 and 30km/h, w...
	Automobile Headrest Strength Tester	Продавец: Standard International Group (HK) Limited	Applicable standards: GB 11550-2009"Automobile seat headrest strength requirements and test me...