Mobile reactor cleaning machine
Introduction
Stainless Steel Industrial Cylinder Automatic Cleaning System (Also Known as Cylinder Auto-Cleaning System)
This system is designed for cleaning three-dimensional mixing tanks, mobile cylinders, transfer cylinders, and circulation cylinders. It utilizes high-pressure water jets controlled by an electric system to operate pumps, valves, and hydraulic mechanisms. The integrated rotating brush design combined with cleaning solution achieves three-dimensional, no-blind-spot coverage through cyclic cleaning. The system operates fully automatically with operator supervision for process monitoring and assistance.
System Configuration
1. Three-dimensional cleaning high-pressure water pump rated 20-500 kg/cm²
2. Copper brush cleaning with solvent spray
3. Inclined discharge structure
4. Blowdown port cleaning device
5. Explosion-proof configuration
6. Automatic lifting mechanism
7. Fixed external frame with safety guardrails
Mobile Cylinder Cleaning Equipment Workflow
1. Transport cylinders to inner cleaning station via forklift and position securely.
2. Cleaning head descends into drum via pneumatic cylinder with pressure detection (anti-damage mechanism), initiating pump station for 360° high-pressure internal cleaning. Fully automated process with no manual intervention.
3. MD high-pressure cleaner used for internal cleaning.
4. 2-4 minute cleaning cycle: Cleaning head stops rotation/spraying and retracts to standby position after completion.
Industrial Cylinder Cleaning Line Workflow
1. Manual loading into loading position with open end facing up (sensor detection).
2. 180° rotation transfer to transition conveyor via flipping mechanism.
3. Conveyor transports to DMF internal cleaning station: Doors close hydraulically, DMF pressurized by pump station forms high-pressure jet through rotating cleaner. Solvent recirculates to waste collection system.
4. Conveyor moves to fresh water cleaning station: Internal/external 360° high-pressure cleaning.
5. Transfer to drying station: Steam-heated airflow achieves 95% moisture removal.
6. Positioning at transition area.
7. Final 180° unloading flip via clamping mechanism.
8. Manual consolidation of cleaned cylinders.
在线联系供应商
Other supplier products
 |
Foam cutter | Standards JB/T 11346-2013 EN 12100 UNE-EN 14886:2008 Scope of application This machine is mainly used for cutting foam materials, which can ... |
 |
Electro-hydraulic servo dynamic fatigue testing machine | Product Introduction: Electro-hydraulic servo dynamic and static fatigue testing machine (hereinafter referred to as the test machine) is mainly... |
 |
STD 500 ultra-high pressure 3D tank cleaning heads | STD 500 ultra-high pressure 3D tank cleaning heads This STD 500 is designed to remove the toughest residues from large tanks in numerous industrie... |
 |
Automotive Wires Flammability Tester-QINSUN | Compliance Standards FMVSS 302 (Federal Motor Vehicle Safety Standard) ISO 6722 (Road Vehicle Cable Flammability) UL 94 (Tests for Flammability ... |
 |
45 Degree Flammability Tester | Standard ASTM D1230: Flammability of Apparel Textiles (45° Inclined Method) CFR 16 Part 1610: Flammability of Clothing Textiles (Federal St... |
Same products
 |
Seat Bumping and Creep Test Bench | 卖方: Standard International Group (HK) Limited | This test bench is used for simulating the car seat bumping and creep situation when a car is run... |
 |
Automobile seat belt fixed point test bench | 卖方: Standard International Group (HK) Limited | Applicable standards: National mandatory standards: GB 15083-2006"Automobile seats, seat fixtur... |
 |
Impact strength tester for car seat headrest | 卖方: Standard International Group (HK) Limited | Applicable standards: GB 15083-2006 "Automobile seats, seat fixtures and headrest strength requi... |
 |
Impact strength tester for car seat launching headrest | 卖方: Standard International Group (HK) Limited | Main parameters: Impact speed:The impact speed of the tester is usually between 25 and 30km/h, w... |
 |
Automobile Headrest Strength Tester | 卖方: Standard International Group (HK) Limited | Applicable standards: GB 11550-2009"Automobile seat headrest strength requirements and test me... |
