Mobile reactor cleaning machine

• 

Introduction

Stainless Steel Industrial Cylinder Automatic Cleaning System (Also Known as Cylinder Auto-Cleaning System)

This system is designed for cleaning three-dimensional mixing tanks, mobile cylinders, transfer cylinders, and circulation cylinders. It utilizes high-pressure water jets controlled by an electric system to operate pumps, valves, and hydraulic mechanisms. The integrated rotating brush design combined with cleaning solution achieves three-dimensional, no-blind-spot coverage through cyclic cleaning. The system operates fully automatically with operator supervision for process monitoring and assistance.

System Configuration

1. Three-dimensional cleaning high-pressure water pump rated 20-500 kg/cm²

2. Copper brush cleaning with solvent spray

3. Inclined discharge structure

4. Blowdown port cleaning device

5. Explosion-proof configuration

6. Automatic lifting mechanism

7. Fixed external frame with safety guardrails

Mobile Cylinder Cleaning Equipment Workflow

1. Transport cylinders to inner cleaning station via forklift and position securely.

2. Cleaning head descends into drum via pneumatic cylinder with pressure detection (anti-damage mechanism), initiating pump station for 360° high-pressure internal cleaning. Fully automated process with no manual intervention.

3. MD high-pressure cleaner used for internal cleaning.

4. 2-4 minute cleaning cycle: Cleaning head stops rotation/spraying and retracts to standby position after completion.

Industrial Cylinder Cleaning Line Workflow

1. Manual loading into loading position with open end facing up (sensor detection).

2. 180° rotation transfer to transition conveyor via flipping mechanism.

3. Conveyor transports to DMF internal cleaning station: Doors close hydraulically, DMF pressurized by pump station forms high-pressure jet through rotating cleaner. Solvent recirculates to waste collection system.

4. Conveyor moves to fresh water cleaning station: Internal/external 360° high-pressure cleaning.

5. Transfer to drying station: Steam-heated airflow achieves 95% moisture removal.

6. Positioning at transition area.

7. Final 180° unloading flip via clamping mechanism.

8. Manual consolidation of cleaned cylinders.

Other supplier products

	Water injection counterweight dummy	Product Introduction This counterweight dummy can be filled with water, the torso and the bottom are separated, independently filled with water o...
	Cleanliness tester	Product Introduction: Cleanliness tester is mainly used for cleanliness detection and analysis of auto parts and new energy power battery parts, w...
	Sweat Color Fastness Tester-QINSUN	I. Product Overview TheSweat Color Fastness Testeris a specialized instrument designed to evaluate the colorfastness of textiles against perspirat...
	Glow wire tester	F242 Glow-wire tester, By simulating the thermal stress caused by heat source or ignition source such as hot component or overload resistor in a sh...
	Swimming goggles sealing tester	Applicable standards: Seal test equipment for swimming goggles according to ISO 18527-3 Product Introduction: The tightness of goggles according...

Same products

	Seat Bumping and Creep Test Bench	Seller: Standard International Group (HK) Limited	This test bench is used for simulating the car seat bumping and creep situation when a car is run...
	Automobile seat belt fixed point test bench	Seller: Standard International Group (HK) Limited	Applicable standards: National mandatory standards: GB 15083-2006"Automobile seats, seat fixtur...
	Impact strength tester for car seat headrest	Seller: Standard International Group (HK) Limited	Applicable standards: GB 15083-2006 "Automobile seats, seat fixtures and headrest strength requi...
	Impact strength tester for car seat launching headrest	Seller: Standard International Group (HK) Limited	Main parameters: Impact speed:The impact speed of the tester is usually between 25 and 30km/h, w...
	Automobile Headrest Strength Tester	Seller: Standard International Group (HK) Limited	Applicable standards: GB 11550-2009"Automobile seat headrest strength requirements and test me...